402,10 excl. VAT

crm+130/IU/TC/E is a chemical resistant stainless steel ultrasonic sensor with LED display in M30 housing with an analog output and a range of 200 - 2,000 mm

SKU: 03-00106 Categories: , Tag:


The crm+130/IU/TC/E ultrasonic sensors from microsonic for level measurements with 1x analog (0-10 Vdc/4-20 mA) output in a stainless steel M30 housing has a measuring range from 200 mm up to 2,000 mm.

Chemical resistance

A transducer with chemical-resistant Teflon film - Most filling processes do not exclude the possibility of materials splashing on the sensor. After long use, these substances often dry up, making them only mechanically removable from the sensor membrane (transducer) on the sensor head. The ultrasonic transducers of the crm+130/D/TC/E sensors are equipped with a protective layer of PEEK-film so that dried residues such as hardened plaster particles or splashes of cement can be easily removed. Furthermore, the protective layer has a high resistance to chemical substances and the threaded housing is made of 1.4571 stainless steel.


With TouchControl all settings of the sensors can be adjusted. The easy-to-read 3-digit LED display continuously shows the currently measured distance and automatically switches between display in mm and cm. Below the display there are two buttons that help set the sensor and cycle through the menu. The switching points of the switching outputs and the window of the analog output can be set numerically using the display. The object to be detected does not have to be present to set the outputs. This makes it possible to teach the sensor without being present at the application location or using a reflector.


LinkControl consists of the LinkControl adapter and added software that allow the mic+ sensors to be set-up through a PC or laptop with the Windows® operating system. All settings in the TouchControl menu can be read, edited via the PC or laptop, saved and sent back to the sensor - all during the operation of the sensor. The two measurement displays offer a solution in complex automation applications by visualizing the distance values.

Additional information


5-pin M12 connector



Sealing class


Chemical resistance, COM input, Push button (s), LED display, Link control, Multiplex, Synchronization, Temperature compensation


Stainless steel

Measuring range

200 - 2,000 mm

Response time

92 ms

Switching frequency

8 Hz




Ultrasonic sensor


0 - 10 V, 4 - 20 mA


Distance sensor

Power supply

9 - 30 Vdc

Menno Reijnders

Our specialists will be happy to help you!

Personalized advice on crm+130/IU/TC/E?

Not sure if this product is right for your purpose? Do you still have a question? Our specialists will be happy to help you.

Phone (working days between 08.30 and 17.00 GMT+1)

Ask your question directly

You may also like…