approximately 2 to 4 weeks
lcs+ ultrasonic sensors
The lcs+sensors have a cube-shaped plastic (PBT) housing (62.2 mm x 62.2 mm) with 4 mounting holes. All status information about the operation of the sensor is provided by 2x two-color LEDs. With two buttons, T1 and T2, all lcs+ sensor can be configured (Teach-in).
LinkControl
The LCA-2 LinkControl adapter allows the user to use the many configuration options of the lcs + sensors. Via the LCA-2 LinkControl adapter, which is available as an accessory, the lcs + sensors can be connected to the PC.
Synchronization of the lcs+ sensors
Easy to configure - In applications where multiple lcs+ sensors are used, the sensors can be synchronized in order to prevent mutual interference. In order to set this up, all sensors have to be connected to each other through pin 5. When there are more than 10 sensors, a SyncBox 1can be used. Synchronization through pin 5 is also possible in IO-Link mode.
IO-Link
The lcs+340/F/A and lcs+600/F/A have a PushPull switching output and support IO-Link version 1.1 as well as Smart Sensor Profile.
