pico+100/F

Description

The pico+100/F ultrasonic sensors from microsonic with 1x PNP/NPN switching output is a compact series in M18 threaded housing with a length of only 41 mm. In addition to the variant with a straight sensor head, there is also a variant with a 90° angled sensor head. The pico+100/F detects from 120 mm to 1,300 mm. With three different measurement and detection ranges, the pico+ series sensors can be used in a wide range of applications. Sensors with a PushPull output support SIO and IO-Link modes. Sensors with an analog output are optionally available with a current output of 4-20 mA or a voltage output of 0-10 Vdc. In SIO mode, the sensors are set via pin 5 using the microsonic teach-in procedure. LinkControl allows the user to make use of the extensive configuration possibilities of the pico+ sensors. Through the LCA-2 LinkControl adapter, that is available as an accessory, the pico+ sensors can be connected to the PC.

NOTE: The pico+100/F has been replaced by the pico+100/F/A. The new sensor version is equipped with IO-Link 1.1 that supports Smart Sensor Profiel. Do you rather configure the sensors with LinkControl? Please keep in mind that this new sensor needs a new set of parameters. Feel free to contact us if you need support.