pico+15/F
€164,00 excl. VAT
pico+15/F is an M18 ultrasonic sensor with 1 x PNP/NPN switching output, IO-Link interface and a range from 20 up to 250 mm. The pico+ 15/F is also available in an ATEX version.
NOTE: The pico+15/F has been replaced by the pico+15/F/A. The new sensor version is equipped with IO-Link 1.1 that supports Smart Sensor Profiel. Do you rather configure the sensors with LinkControl? Please keep in mind that this new sensor needs a new set of parameters. Feel free to contact us if you need support.
Description
The pico+15/F ultrasonic sensors from microsonic with 1x PNP/NPN switching output is a compact series M18 housing with a length of just 41 mm. In addition to the variant with a axial sensor head there is also one with a 90° right-angled sensor head. The pico+15/F detects from 20 mm up to 250 mm. With three different measurement and detection ranges the sensors from the pico+ series are usable in a wide variety of applications. Sensors with a PushPull output support the SIO- and IO-Link modes. The sensors with an analog output are optionally available with a current output of 4-20 mA and voltage-based outputs of 0-10 Vdc. In the SIO-mode, the sensors are configured through pin 5 with the microsonic teach-in procedure. LinkControl allows the user to make use of the extensive configuration possibilities of the pico+ sensors. Through the LCA-2 LinkControl adapter, that is available as an accessory, the pico+ sensors can be connected to the PC.
NOTE: The pico+15/F has been replaced by the pico+15/F/A. The new sensor version is equipped with IO-Link 1.1 that supports Smart Sensor Profiel. Do you rather configure the sensors with LinkControl? Please keep in mind that this new sensor needs a new set of parameters. Feel free to contact us if you need support.
Additional information
| Connection | 5-pin M12 connector |
|---|---|
| Housing | M18 |
| Sealing class | |
| Interface | IO-Link Version 1.0.1 |
| Features | ATEX, COM input, Link control, Multiplex, Synchronization, Temperature compensation |
| Material | Brass |
| Measuring range | 20 – 250 mm |
| Response time | 32 ms |
| Switching frequency | 25 Hz |
| Series | pico+ |
| Type | Ultrasonic sensor |
| Output | IO-Link, PushPull |
| Version | Distance sensor |
| Power supply | 10 - 30 Vdc |
| Status | Phased out |
Our specialists will be happy to help you!
Personal advice on the pico+15/F?
Not sure if this product is right for your purpose? Do you still have a question? Our thermography specialists will be happy to help you.
Phone (working days between 08.30 and 17.00 GMT+1)
- +31 (0)416 378 239
- +32 (0)2 464 96 90
