approximately 6 to 8 weeks
The GLOSS-5-85° gloss measurement sensor for inline gloss measurements is ideally suited for matte materials. The sensor measures continuously in the production process. The gloss, gloss degree or gloss value of the surface is expressed in GU (Gloss Units). Depending on the sensor and the material to be measured, Gloss Units are measured between 0 (no gloss) and 100 (high gloss) GU. When the gloss level is <10 GU, this is difficult for many gloss meters to measure. The GLOSS-5-85° is just right for this and generates a constant, reproducible and reliable measurement. This is partly due to the working distance of 5 mm and the angle of the sensor to the material of 85 degrees. This type of gloss sensor is used in the paper, floor, plastic and textile industries, among others. These gloss meters are important in quality control processes to ensure that surfaces meet specific gloss requirements or to ensure consistency in production processes.
The sensor comes with software for Windows® for parameterization. Up to 7 gloss values can be taught in. Via an analog output (0-10 Vdc/4-20 mA) the measured gloss value is outputted. Also an RS232 interface is available for data exchange. If an Ethernet interface is used, the cab-usb4/ETH can optionally be used. The cab-usb4/USB converter is widely used for connection to a computer via USB.
With the GLOSS-5-85°-CAL the sensor can be periodically calibrated for reliable measurement. In addition, it is possible to use the GLOSS-5-85°-OFL using a sensor as a hand-held meter at the ideal measuring distance. This allows an identical measurement value to be obtained in a laboratory as during the production process.
