The L-LAS-LT-250-AL is a displacement sensor with a range of 440 mm (60 mm to 500 mm), an accuracy of 250 μm and a switching frequency of 2 kHz (Normal) or 3.8 kHz (High speed). The sensor is equipped with 2 digital inputs, 3 digital outputs and 1 analog outputs. The laser communicates via the RS232 interface and uses LED-indication.
The LAS-LT-AL series from Sensor Instruments are displacement sensors in IP67 housing. The Advanced Line line lasers use a visible laserspot with a line (2mm x 3mm) and have a bigger switching frequency than other series. The normal switching frequency is 2 kHz and it is also possible to set a higher frequency up to 3.8 kHz. The sensors are provided with 2 digital inputs, 2 digital outputs (PNP/NPN and NO+NC) and 1 analog output (0 - 10 V or 4 - 20 mA). Furthermore the L-LAS-LT-AL series communicate via RS232 interface. With the USB- or Ethernet convertor the laser can connect with a Windows computer and be configured with the supplied software in a graphical clear display.
Converter for sensors from Sensor Instruments. Converts the RS232 signal from the sensor to USB. This way, the sensor can easily be configured through a PC or laptop.
Converter for sensors from Sensor Instruments. Converts the RS232 signal from the sensor to Ethernet. This way, the sensor can be added to and configured through the network.
The Z-LASER Z10M18B3-F-520-lhi90a is a green 10 mW line projection laser with a high-intensity line optic with 90 degrees aperture angle and manual focus.