The LAS-LT-AL series from Sensor Instruments are displacement sensors in IP67 housing. The Advanced Line line lasers use a visible laserspot with a line (2mm x 3mm) and have a bigger switching frequency than other series. The normal switching frequency is 2 kHz and it is also possible to set a higher frequency up to 3.8 kHz. The sensors are provided with 2 digital inputs, 2 digital outputs (PNP/NPN and NO+NC) and 1 analog output (0 - 10 V or 4 - 20 mA). Furthermore the L-LAS-LT-AL series communicate via RS232 interface. With the USB- or Ethernet convertor the laser can connect with a Windows computer and be configured with the supplied software in a graphical clear display.
L-LAS-LT-38-AL
€1.633,00 excl. VAT
The L-LAS-LT-38-AL is a displacement sensor with a range of 16 mm (32 mm to 48 mm), an accuracy of 5 µm and a switching frequency of 2 kHz (Normal) or 3.8 kHz (High speed). The sensor is equipped with 2 digital inputs, 3 digital outputs and 1 analog outputs. The laser communicates via the RS232 interface and uses LED-indication.
approximately 6 to 8 weeksDocumentation
| Amount of outputs | 4 |
|---|---|
| Housing | 81.19 x 65 x 20 mm |
| Sealing class | |
| Interface | RS232 |
| Features | LED display |
| Laser class | 1 |
| Measuring range | 16 mm |
| Accuracy | 5 μm |
| Switching frequency | 2 kHz, 3.8 kHz |
| Series | |
| Output | 0 - 10 V, 4 - 20 mA, NC, NO, NPN, PNP |
| Version | Triangulation |
| Power supply | 24 Vdc |
You may also like...
cab-4 / ETH-500
Converter for sensors from Sensor Instruments. Converts the RS232 signal from the sensor to Ethernet. This allows the sensor in...
cab-4 / USB
Converter for sensors from Sensor Instruments. Converts the RS232 signal from the sensor to USB. Thus, the sensor can easily...
