The RLS-GD gloss sensors for inline gloss measurements in GU (Gloass Units). Depending on the sensor and the material to be measured, the Gloss Units are measured between 0 and 100 GU. The sensor is supplied with software for Windows® for parameterization. Up to 31 gloss values can be taught in. The measured gloss value is output via two analog output (0-10 Vdc / 4-20 mA). An RS232 interface is also available for exchanging data. If an Ethernet interface is used, the cab-usb4/ETH converter can optionally be used. The cab-usb4/USB converter is widely used for connecting to a PC via USB.
RLS-GD-5/85°
€5.133,00 excl. VAT
The RLS-GD-5/85° is gloss sensor from Sensor Instruments suitable for gloss measurements of matte materials (<10GU) with a range of 5 mm and a tolerance of +/- 10%. The sensor is equipped with 2 analog (0-10 V or 4-20 mA_ outputs and a RS232 interface.
approximately 6 to 8 weeksPrefer advice on or demonstration of this product first?
Make an appointment or call directly
Downloads
DatasheetYou may also like...
cab-4 / USB
Converter for sensors from Sensor Instruments. Converts the RS232 signal from the sensor to USB. Thus, the sensor can easily...
cab-las8/SPS-2m
PUR power & control cables with a length of 2 meters, for color sensors and laser sensors (SPECTRO-3, L-LAS-LT-CL, L-LAS-TB-CL) from...
cab-4 / ETH-500
Converter for sensors from Sensor Instruments. Converts the RS232 signal from the sensor to Ethernet. This allows the sensor in...
