LAM 301.200 is an industrial laser distance sensor with RS422 interface and a range of up to 3,000 meters on a target board and 300 meters on natural surfaces.
leave your details and a specialist will contact you
The LAM 301.200 is an industrial laser distance sensor suitable for robust distance measurements over a very long distance. Ranging up to 3,000 meters on a reflector and up to 300 meters on natural surfaces, with a measuring speed of up to 2,000 measurements per second. The measurements are available via an RS-422 interface and 4-20mA output.
There are different measurement options such as:
- Single measurement after receiving a trigger signal on the digital input
- Single measurement after receiving a trigger signal on the via RS-422
- Continuous measurement at set measurement speed (up to 2,000 measurements per second)
- Continuous measurement with variable measuring times (robust measurements on different measurement surfaces)
The two digital outputs make it possible, for example, to indicate whether an object is within a certain range or at a certain position. It is also possible to send out a start and end position using these two switching outputs.
The LAM301.200 can be used in combination with RS-422, after saving the parameters the laser distance sensor works standalone.
The laser class 1 ensures that the laser sensor is safe to use.
12-pin M16 connector
4 - 20 mA, NC, NO, PNP
|Amount of outputs|
Time of Flight
10 - 30 Vdc
Roeland van Meijl
Personal advice on the LAM 301.200?
Not sure if this product is right for your purpose? Do you still have a question? Our thermography specialists will be happy to help you.