The SG2 series of light grids from Telco Sensors consist of a separate transmitter and receiver that must be placed facing each other. These are built in a 12 x 28 mm aluminum housing with a 5-wire cable, relay and a 12 - 36Vdc power supply. With the automatic signal tracking (AST), no on-site adjustments or configurations are required during installation.
See our available models from the SG2 series:
| Model | Transmitter | Receiver | Housing |
|---|---|---|---|
| Standard | SGT 2-200-040-000-A1-B-00-3F/B | SGR 2-200-040-000-A1-B-07-3F/B | Leading edge |
| Standard | SGT 2-200-040-000-A1-A-00-3F/B | SGR 2-200-040-000-A1-A-07-3F/B | Slim line |
| Electrical synchronization | SGT 2-200-040-000-A1-B-00-ES-3F/B | SGR 2-200-040-000-A1-B-07-ES-3F/B | Leading Edge |
| Electrical synchronization | SGT 2-200-040-000-A1-A-00-ES-3F/B | SGR 2-200-040-000-A1-A-07-ES-3F/B | Slim line |
| Electric sync + OSE output | SGT 2-200-040-000-A1-B-OSE-ES-3F/B | SGR 2-200-040-000-A1-B-OSE-ES-3F/B | Leading Edge |
| With blanking function* | SGT 2-200-020-010-B1-A-00-3F | SGR 2-200-020-010-B1-A-06-3F | Slim line |
*The version with blanking function and 20 channels does not meet Belgian KB requirements
In stock
approximately 6 to 8 weeks
