| Housing | M18, Ø20 mm |
|---|---|
| Material | Aluminum |
| Mounting | Tiltable, Sliding |
H2-11 mounting bracket
H2-11 is an aluminum mounting bracket in combination with an AP11 narrowed head and is tiltable and, due to the slot holes, also moves back and forth. Specially designed for the Z-Laser ZM18/ Ø20mm lasers, but also usable for sensors with an M18/Ø20mm housing.
Available on request
Leave your details and a specialist will contact you.
In stockRelated products
PVC 5-wire M12 connection cable
approximately 2 to 4 weeksPVC connection cable for sensors with a 5-pin M12 male connector. The cable is equipped with a 5-pole M12 female connector and makes for a waterproof (IP67) sealing.
€18,30 – €51,30 excl. VAT Select optionsPUR Connection cable 3-wire M8
On requestPUR connection cable for sensors with a 3-pin M8 female connector. The cable is equipped with a 3-pin M8 female connector and makes for a waterproof (IP67) sealing.
PVC 3-wire M8 connection cable
On requestPVC connection cable for sensors with a 3-pin M8 male connector. The cable is equipped with a 3-pole M8 female connector and makes for a waterproof (IP67) sealing.
€9,94 – €18,38 excl. VAT Select optionsUF-90/M30
In stockBeam deflector for microsonic ultrasonic sensors with M30-housing, such as the mic+ and mic- series with a maximum range of up to 1,3 m.
€19,04 excl. VAT Add to cart
approximately 2 to 4 weeks
