Shopping Cart

No products in the cart.

Elevators

Here you will find solutions for safety and efficiency with regard to elevators and elevator doors. The light curtains allow access by people without closing doors in the meantime. Before entering the lift, the precisely adjustable door sensors ensure that doors only open and close when people are near.

Filter
  • 3H-IR14C

    approximately 2 to 4 weeks

    3H-IR14C is an infrared safety device for use in elevators and horzionally closing doors up to 3 meters high. The 3H-IR14C complies...

    155,93 excl. VAT Select options This product has multiple variants. The options may be chosen on the product page
  • AerWave

    In stock

    The AerWave is a non-contact door switch that automates the opening and closing of doors. By swinging a hand within the range...

    101,91 excl. VAT Add to cart
  • ClearWave non-contact door switch

    ClearWave

    In stock

    Hotron's ClearWave is a non-contact door switch that automates the opening and closing of doors. By just a wave of the hand...

    106,32 excl. VAT Add to cart
  • The Hotron HR100-ct infrared door sensor for access technology

    HR100-CT

    approximately 2 to 4 weeks

    HR100-CT is an infrared safety device for use in elevators and horzionally closing doors up to 3 meters high. The HR100-CT complies...

    175,77 excl. VAT Select options This product has multiple variants. The options may be chosen on the product page
  • The Hotron HR100-ct infrared door sensor for access technology

    HR100/BL

    In stock

    The HR100/BL is a sliding door activation system combined with a pedestrian safety sensor. The HR100/BL can be installed up to 3 meters high. The sensor...

    153,72 excl. VAT Add to cart
  • Hotron HR400-IND industrial door activation by infrared detection

    HR400-IND

    approximately 2 to 4 weeks

    The Hotron HR400-IND is a unique safety sensor for presence and motion detection of fast moving vehicles at industrial doors. The HR400-IND...

    259,56 excl. VAT Add to cart
  • Hotron HR50-UNI door sensor

    HR50

    approximately 2 to 4 weeks

    The Hotron HR50 is a bi-directional radar sensor for the automation of swing and sliding doors up to 2.2 meters high. The...

    78,75 - 196,06 excl. VAT Select options This product has multiple variants. The options may be chosen on the product page
  • Hotron HR50-UNI door sensor

    HR50-UNI

    approximately 2 to 4 weeks

    The Hotron HR50-UNI is a unidirectional radar sensor for the automation of swing and sliding doors up to 2.2 meters high. The sensor...

    89,78 excl. VAT Select options This product has multiple variants. The options may be chosen on the product page
  • Hotron J-Wave door switch

    J-Wave

    approximately 2 to 4 weeks

    Hotron's J-Wave is a non-contact door switch that automates the opening and closing of doors. By just a wave of the hand...

    89,78 excl. VAT Add to cart
  • SG10 MS light curtains from Telco Sensors

    SG 10 M/S Series

    approximately 6 to 8 weeks

    When you choose to automate the opening and closing of your sliding gate, Telco Sensors SG10 M/S is the right...

  • Housings of SG1 light curtains from Telco Sensors

    SG1 series

    approximately 6 to 8 weeks

    Telco Sensors' SG1 series are light curtains that consist of a transmitter and receiver in one housing. This...

  • Telco Sensors SG10 series light curtain

    SG10 series

    approximately 6 to 8 weeks

    Special light curtain for gates, fences and other static horizontal closing access systems. Suitable for outdoor applications. Available in profile heights from 85...

  • The SG11 light curtains from Telco Sensors

    SG11 series

    approximately 6 to 8 weeks

    Light strip set for elevators, profile height 200 cm or 210 cm. Leading edge or slim line housing. Complies with EN 81-20....

  • The light curtains of the SG2 series from Telco Sensors

    SG2 series

    approximately 6 to 8 weeks

    Telco Sensors' SG 2 series is one of the most widely used light strips for elevator door security and...

  • Image of radar sensor from Telco Sensors

    SMM 01 4033H S50P 0.6-J4

    In stock

    High-frequency radar sensor with 0.6 m fixed cable and 4-pin M12 connector serving the detection of persons and objects for elevator doors,...

  • Image of radar sensor from Telco Sensors

    SMM 01 4033H S50P 5

    approximately 6 to 8 weeks

    Radar sensor for detection of persons and objects for elevator doors, store doors or escalators. Equipped for walking direction detection. Through the use of...

  • Image of radar sensor from Telco Sensors

    SMM 01 4033L S50P 0.6-J4

    approximately 6 to 8 weeks

    Low-frequency radar sensor with 0.6 m fixed cable and 4-pin M12 connector serving the detection of persons and objects for elevator doors,...

  • Image of radar sensor from Telco Sensors

    SMM 01 4033L S50P 5

    approximately 6 to 8 weeks

    Radar sensor for detection of persons and objects for elevator doors, store doors or escalators. Equipped for walking direction detection. Through the use of...

  • Image of radar sensor from Telco Sensors

    SMM 01 8023H S50P 5

    In stock

    High-frequency radar sensor with solid-state (NO) output for detecting persons and objects for elevator doors, store doors or escalators. Equipped...

  • Image of radar sensor from Telco Sensors

    SMM 01 8023L S50P 5

    In stock

    Low frequency radar sensor for detection of persons and objects for elevator doors, store doors or escalators. Equipped for walking direction detection. Due to the...

A safe entrance and the efficient operation of elevators can be guaranteed with the wide range of sensors that Sensor Partners offers. Below the possibilities are listed:

A safe entrance with Telco Sensors

Telco Sensors has a wide range of photoelectric sensors, light grids and radar sensors. These optical sensors are used for the entrance and security in a around elevators. Telco Sensors sensors are easy to install, have a strong power and have a high immunity against external light.

SM3000 series photoelectric sensors

The Telco Sensors SM3000 photoelectric sensors are a series of transmitter/receiver photoelectric sensors with a range of 6 or 15 meters and available in various plastic or brass housings. The SM3000 series is widely used in logistics processes, conveyor belts and packaging machines, but also in access technology on gates, fencing and lifts. The sensitivity of the sensors is adjustable through control input and are equipped with power and output indication. In addition to the standard versions, we also supply a TÜV certified version (AOPD) for industrial doors and fencing EN12978. The series has been developed for compactness without compromising on robustness of the housing. This makes the photoelectric sensors disreetly installable in different industrial applications, where for example dirt buildup or exposure to water occurs.

SMM series radar sensors

The SMM series radar sensors from Telco Sensors have been widely used in access technology for the detection of persons and objects for elevator doors, shopping doors or escalators. The use of microwaves ensures an invisible mounting and the possibility to use multiple sensors in the same room and application without interference.

SG1 series light grids

The SG1 series from Telco Sensors are light curtains with a transmitter and a receiver in a aluminium housing. The light grids are for example used in elevators. The light curtain is also equipped with a time-out function, which can be turned off. Advanced signal tracking (AST) eliminates the need for on-site adjustments or configurations during installation.

SG2 series light grids

The light grids from the SG 2 series of Telco Sensors is one of the most widely used light grid series for the protection of lift doors and complies with the Belgian KB and EN 81-20. The series is available in leading edge or slim line housing. Also available in a version with electrical synchronization and a version with both electrical synchronization and OSE output are possible to choose from. Available in profile heights of 200 cm.

SG11 series light grids

The SG11 serie are light grids usable in elevators. the light grids meet the EN 81-20 and work in combination with the SGC 11 controllers. The light grids are available with a profile of 200 cm or 210 cm and in a leading edge or slim line housing.

The security and presence and movement detection with Hotron

Hotron features a wide range of safety sensors, door switches & radar sensors. Hotron sensors are used to detect the presence and movement in and around elevators. Moreover the door switches of Hotron are capable to open elevator doors easily, contactless or with a single push on a button. The highest priority of Hotron is guaranteeing the safety in elevators and environment.

HR100/HR100-CT safety sensors

HR100/HR100-CT are infrared safety sensors for use in elevators up to 3 meters high. The sensor is energy efficient, versatile to use and moreover a safe solution. The sensors are easy to set up.

HR400IND safety sensor

The Hotron HR400-IND is an unique safety sensor for the presence and motion detection of people, animals and objects in around elevators. The HR400-IND can be mounted high in the middle above the door up to a height of 4.7 meters and activate the industrial door by means of reliable detection. Due to the large detection field (6 meters wide and 4 meters high), people, animals and objects are detected in time and unnecessary opening of the elevator door is prevented. This also benefits safety and ensures less energy costs in elevators.

3H-IR14C safety sensor

The 3H-IR14C is an infrared safety device to be used in elevators and horizontally closing doors up to 3 meters high. This is the smallest sensor on the market with personal security and automatic door activation which is at the same time EN16005-compliant. The door sensor is safe to use because of the narrow beam spacing. Moreover the sensor is capable to monitior everytging reliably, so not only passers-by in the area of the elevators, but also the internal systems.

SS-3 activation- and safety sensor

The SSR-3 is a hybrid activation- and safety sensor for horizontally closing doors and elevators. Using microwaves the sensor is activated the moment movement is detected in the direction of the opening and closing of the automatic door. With active infrared detection the sensor prevents that the door closes. The SSR-3 has a big detection area up to 4 x 4 meter, which leads to a punctual opening of the door. This makes the sensor especially suited for applications in crowded places such as at airports, supermarkets or shopping malls. The SSR-3 meets the EN16005 European norm for the user safety of automatic doors.

ClearWave door switch

Hotron's ClearWave is a non-contact door switch that automates the opening and closing of doors. A door can be opened safely, but above all hygienically, with just a handwave within the range (5 - 40 cm) of the sensor. The sensor is moreover water resistant and can be easily built-in.

J-Wave door switch

The J-Wave from Hotron is a contactless door switch suited for automating the opening and closing of doors. With just a slow or fast handwave within a range of 30 cm of the sensor a door can be opened both safe but especially hygenically. The sensor has a firm housing and moreover is illuminated in the dark because of the LED-lighting. Because of the narrow design of the switch it is easy to built-in.

AerWave door switch

The AerWave is a contactless door switch which automates the opening and closing of doors. With only a handwave within the range of the sensor (1-15 cm) the door can be opened in a safe and hygienic manner. Suited for elevators in clean rooms, food processing, hospitals and clinical spaces and last chemical industries. The detection is shown using a beep or a flasing LED. With the WR-24 receiver the door switch operates on a 2.4 GHz frequency and besides that up to 10 AerWave switches can be connected on one WR-24 reciever.

WT-400 door switch

The WT-400 from Hotron is a door switch which automates the opening and closing of doors wirelessly. With just one press on the button a door can be safely opened. Easy mounting because of the narrow profile of the switch. Wireless door switch works via a 2.4GHz frequency. It is possible to connect as many WT-400 door switches as desired on the WR-24 receivers. Simple installation and connection with the receiver with just one push on the pairing-button.

HR50 bi-directional radar sensor

The HR-50 from Hotron is a bidirectional radar sensor which can be mounted above swing and sliding doors up to 2.2 meters high. With this height, the sensor has a range of 4 meters. This ensures timely detection and activation of the door for fast moving pedestrians and/or vehicles.

HR50-UNI unidirectional radar sensor

The HR-50 UNI from Hotron is an unidirectional radar sensor which can be mounted above swing and sliding doors up to 2.2 meters high. From this height, the sensor has a range over an area that extends up to 4 meters. This ensures timely detection and activation of the door for fast moving as well as slow moving pedestrians and/or vehicles.