Hangar doors
Big hangars and big doors: maintaining oversight and performing detections on time are crucial. Not only vehicles such as planes and cars but also persons can be detected in order for doors to be opened and closed correctly.
HSB® Safety Bumpers
Available on orderHaake Technik HSB® safety bumpers are custom-made foam bumpers. The bumpers protect people and objects in the event of potential entrapment hazards....
SMR 9070 TS 5
approximately 6 to 8 weeksPhotoelectric receiver in stainless steel (IP69K) M18 housing, 5 m. fixed cable and NPN (NC) switching output
SMR 9270 TP 0.1-J5
In stockPhotoelectric receiver in plastic (IP69K) M18 housing with 10 cm pigtail connector, 70 m range and a PNP-NC output.
SMR 9270 TP 15
approximately 6 to 8 weeksPhotoelectric receiver in plastic (IP69K) M18 housing with 15 m. fixed cable, 70 m range and a PNP-NC output.
SMR 9270 TP 5
approximately 6 to 8 weeksPhotoelectric receiver in plastic (IP69K) M18 housing with 5 m. fixed cable, 70 m range and a PNP-NC output.
SMR 9270 TS 0.1-J5
In stockPhotoelectric receiver in stainless steel (IP69K) M18 housing with 10 cm pigtail connector, 70 m range and a PNP-NC output.
SMR 9270 TS 15
In stockPhotoelectric receiver in stainless steel (IP69K) M18 housing with 15 m. fixed cable, 70 m range and a PNP-NC output.
SMT 9070C TP 0.1-J5
In stockPhotoelectric transmitter in plastic (IP69K) M18 housing with 10 cm pigtail connector
SMT 9070C TP 15
approximately 6 to 8 weeksPhotoelectric transmitter in plastic (IP69K) M18 housing with 15 m fixed cable
SMT 9070C TP 5
In stockPhotoelectric transmitter in plastic (IP69K) M18 housing with 5 m fixed cable
SMT 9070C TS 0.1-J5
In stockPhotoelectric transmitter in stainless steel (IP69K) M18 housing with 10 cm pigtail connector
SMT 9070C TS 15
In stockPhotoelectric transmitter in stainless steel (IP69K) M18 housing and 15 m fixed cable
SMT 9070C TS 5
approximately 6 to 8 weeksPhotoelectric transmitter in plastic (IP69K) M18 housing with 5 m fixed cable
Available on order
approximately 6 to 8 weeksThe reliable and moreover safe detection of vehicles and people to correctly open and close hangar doors can be guaranteerd with the wide range of sensors which Sensor Partnes offers. Below the possibilities are listed:
A safe entrance with Telco Sensors
Telco Sensors has a wide range of photoelectric sensors, light grids and radar sensors. These optical sensors are dor example used for the entrance and security in a around hangar doors. Telco Sensors sensors are easy to install, have a strong power and have a high immunity against external light.
The SM9000 series photoelectric sensors
The Telco Sensors SM9000 series is a unique series of transmitter/receiver photoelectric sensors that distinguish themselves with their extreme power. This makes the photoelectric sensor suited for applications in which they are exposed to a lot of dirt, water and light or where large distances are bridged, but also for applications with a lot of dust, fog, smoke or mist. Think of applications in the acces technology such as with hangar doors. The photoelectric sensors have an M18 threaded housing and IP69K sealing degree. Cleaning the sensors under high pressure is therefore no problem.
HSB® Safety Bumpers
HSB® safety bumpers from Haake are used for protecting against risks at shearing and crushing edges, for instance at hangar doors. All Safety Bumpers of series HSB® meet the requirements for safety components according to the Machinery Directive 2006/42/EC.