Protection
Protection may be necessary in some applications. This protection can be in order to protect sensors against, for example, high or low temperatures or extreme dirt. Think of air purge collars, water- or air-cooled housings or light protectors.
Protection cap PWL
In stockThe protection cap has a stainless steel body and provides protection for the sensor lens. This accessory is ideal for...
Protection cap PWS
approximately 2 to 4 weeksThe protection cap has a stainless steel body and provides protection for the sensor lens. This accessory is ideal for...
LAM60 Light Protector
approximately 2 to 4 weeksThe LAM60 Light Protector is designed specifically for use on the LAM60 laser distance sensors. It is a mechanical...
WJ Air/water cooled housing
approximately 2 to 4 weeksThe air/water-cooled housing ensures that the sensor works at temperatures even above 70 °C.
APF air purge collar
approximately 2 to 4 weeksThe APF air blow-off module keeps the detection head lens dry and free of dust. The APF is suitable for the...
APL air purge collar
In stockThe air blow-off module is used to keep dust, fumes, moisture and other contaminants away from the lens. Air flows from the...
Air purge collar APM
approximately 2 to 4 weeksThe air blow-off module is used to keep dust, fumes, moisture and other contaminants away from the lens. Air flows from the...
APN air purge collar
approximately 2 to 4 weeksThe air purge collar is used to prevent dust, condensation, moist and other obstructive buildups in front of the lens.
APS air purge collar
approximately 2 to 4 weeksThe air blow-off module is used to keep dust, fumes, moisture and other contaminants away from the lens. Air flows from the...
TRGM 12
In stockThe TRGM 12 is a stainless steel protection cap for photocells in an M12 housing. The hood is equipped with a glass...
TRGM 18
approximately 6 to 8 weeksThe TRGM 18 is a stainless steel protection cap for photocells in an M18 housing. The hood is equipped with a glass...
TRPG 11 A
approximately 6 to 8 weeksThe TRPG 11 A is a stainless steel attachment with plastic tubing for photocells in a Ø10mm housing and provides...
TU 12
In stockThe TU 12 A is an attachment with plastic tubing for photocells in an M12 housing and provides...
WCJ Water-cooled housing
approximately 2 to 4 weeksThe water-cooled housing allows the sensor to be installed at ambient temperatures above 50°C. This housing also includes a...
WC-HR50
In stockThe WC_HR50 is a protection cap for the HR50 door sensors. It protects sensors installed in outdoor applications where there are...
WC-IR/BL
In stockThe WC_IR/BL is a protection cap for door sensors. It protects sensors installed in outdoor applications where there is exposure to...
In stock
approximately 2 to 4 weeks