Elevators
Here you will find solutions for safety and efficiency with regard to elevators and elevator doors. The light curtains allow access by people without closing doors in the meantime. Before entering the lift, the precisely adjustable door sensors ensure that doors only open and close when people are near.
-
SPPR 2910/1 5
In stockThe Telco Sensors SPPR 2910/1 5 packing set consists of a Retro Reflective photocell with polarizing filter, a TR SP35-50L mounting bracket and an ILR 50-50 RHE reflector. Using this photocell, it is easy to set up a reliable detection application for...
-
SMR 3206 S30 10
In stockSMR 3206 S30 10 is a photoelectric receiver in Ø12.7 snap-in design housing with 10 m. fixed cable. Range 6 meters, with PNP-NC output
-
SMT 3000C S30 5
In stockSMT 3000C S30 5 is a photoelectric transmitter in Ø12,7 snap-housing with 5 m. fixed cable. Range 6 meter
-
SMR 3206 S30 0.15 T3
In stockSMR 3206 S30 0.15 T3 is a photoelectric receiver in snaphousing with 15 cm pigtail connector and PNP-NC output. This version is widely used for doors and gates because of the discrete installation method. The range of the sensor is 6 meters.
-
SMT 3000C S30 0.15 T3
In stockSMT 3000C S30 0,15 T3 is a photoelectric transmitter in snap-in design housing with 15 cm pigtail connector. This version is widely used for doors and gates because of the discreet installation method. The range of the sensor is 6 meters.
-
SG10 series
approximately 6 to 8 weeksSpecial light grid for gates, fencing and other statically arranged horizontally closing access systems. Suitable for outdoor applications. Available in profile heights from 85 cm to 280 cm and ranges up to 10 meters or 14 meters.
-
SG 10 M/S Series
approximately 6 to 8 weeksWhen you choose to automate the opening and closing of your sliding gate, Telco Sensors SG10 M/S is the right choice to prevent entrapment, injury and damage to people, vehicles or objects. Suitable for outdoor applications where both the walk-in side...
-
SMM 01 4033L S50P 5
approximately 6 to 8 weeksRadar sensor for the detection of persons and objects for elevator doors, shop doors or escalators. Suited for walking direction detection. Due to the use of microwaves it is suitable for placement behind a plastic wall and therefore completely out of sight.
-
SMM 01 4033H S50P 5
approximately 6 to 8 weeksRadar sensor for the detection of persons and objects for elevator doors, shop doors or escalators. Suited for walking direction detection. Due to the use of microwaves it is suitable for placement behind a plastic wall and therefore completely out of sight.
-
SG2 series
approximately 6 to 8 weeksThe SG 2 series from Telco Sensors is one of the most widely used light strips for elevator door protection and approved according to Belgian RD and complies with EN 81-20. The series is available in leading edge or slim line...
-
SG11 series
approximately 6 to 8 weeksLight grid set for lifts with profile height of 200 cm or 210 cm. Leading edge or slim line housing. Complies with EN 81-20. Works in conjunction with SGC 11 controllers.
-
SG1 series
approximately 6 to 8 weeksTelco Sensors' SG1 series are light curtains consisting of a transmitter and receiver in one housing. This light curtain is available in 12-36Vdc with a 5-wire cable and a relay. The light curtain also features a time-out...
-
HR100-CT
approximately 2 to 4 weeksHR100-CT is an infrared safety device for use in elevators and horizontally closing doors up to 3 meters high. The HR100-CT meets the EN16005 European standard for the user safety of automatic doors.
€175,77 excl. VAT Select options -
3H-IR14C
approximately 2 to 4 weeks3H-IR14C is an infrared safety device for use in elevators and horizontally closing doors up to 3 meters high. The 3H-IR14C meets the EN16005 European standard for the user safety of automatic doors.
€155,93 excl. VAT Select options -
SSR-3
approximately 2 to 4 weeksSSR-3 is a hybrid activation and safety sensor for horizontally closing doors and elevators, among others. On the one hand, the sensor activates the opening or closing of the automatic door based on movement and direction using microwaves. On the other hand, by...
€197,82 excl. VAT Select options -
HR400-IND
approximately 2 to 4 weeksThe Hotron HR400-IND is a unique safety sensor for presence and motion detection of fast moving vehicles at industrial doors. The HR400-IND can be mounted high center above the door up to 4.7 meters in height and through its reliable detection the...
€259,56 excl. VAT Add to cart
A safe entrance and the efficient operation of elevators can be guaranteed with the wide range of sensors that Sensor Partners offers. Below the possibilities are listed:
A safe entrance with Telco Sensors
Telco Sensors has a wide range of photoelectric sensors, light grids and radar sensors. These optical sensors are used for the entrance and security in a around elevators. Telco Sensors sensors are easy to install, have a strong power and have a high immunity against external light.
SM3000 series photoelectric sensors
The Telco Sensors SM3000 photoelectric sensors are a series of transmitter/receiver photoelectric sensors with a range of 6 or 15 meters and available in various plastic or brass housings. The SM3000 series is widely used in logistics processes, conveyor belts and packaging machines, but also in access technology on gates, fencing and lifts. The sensitivity of the sensors is adjustable through control input and are equipped with power and output indication. In addition to the standard versions, we also supply a TÜV certified version (AOPD) for industrial doors and fencing EN12978. The series has been developed for compactness without compromising on robustness of the housing. This makes the photoelectric sensors disreetly installable in different industrial applications, where for example dirt buildup or exposure to water occurs.
SMM series radar sensors
The SMM series radar sensors from Telco Sensors have been widely used in access technology for the detection of persons and objects for elevator doors, shopping doors or escalators. The use of microwaves ensures an invisible mounting and the possibility to use multiple sensors in the same room and application without interference.