Available Filters
Filters

2 products found

Series
Output
Housing
Sealing class
Connection
Power supply
Profile
Shopping Cart

No products in the cart.

Gates & Fences

For good, controlled access to gates and other fencing, vehicles must be correctly detected and monitored. Various options are available for this, if desired. Think of induction loops in the ground, light curtains on both sides of the door opening or a bumper that stops the door when it comes into contact with a vehicle.

Filter
  • Telco Sensors SG10 series light curtain

    SG10 series

    approximately 6 to 8 weeks

    Special light grid for gates, fencing and other statically arranged horizontally closing access systems. Suitable for outdoor applications. Available in profile heights from 85 cm to 280 cm and ranges up to 10 meters or 14 meters.

  • SG10 MS light curtains from Telco Sensors

    SG 10 M/S Series

    approximately 6 to 8 weeks

    When you choose to automate the opening and closing of your sliding gate, Telco Sensors SG10 M/S is the right choice to prevent entrapment, injury and damage to people, vehicles or objects. Suitable for outdoor applications where both the walk-in side...

The safe and controlled entrance of gates and fences can be guaranteerd with the wide range of sensors which Sensor Partnes offers. Below the possibilities are listed:

Haake safety edges

Safety edges are rubber safety strips, also known bumper strips, from Haake which are used as edge protection on doors or moving machine parts. Think of application in the automated acces technology such as with revolving doors, gates and fences. Unlike safety bumpers, safety edges are used in applications with a short braking distance up to approx. 40 mm. A distinction can be made in the braking distance and the type of mounting profile.

Passage and security with Telco Sensors

Telco Sensors has a wide range of photoelectric sensors, light grids and radar sensors. These optical sensors are used for the passage and security when entering and leaving at gates and fences. Telco Sensors sensors are easy to install, have a strong power and have a high immunity against external light.

SG10 series light grids

Telco Sensors SG10 series light grids that are specially designed for securing sliding gates, fencing and other statically arranged and horizontally closing access systems. Moreover the light grids are suited for outdoor applications. The SG10 is available with profile heights of 85 cm up to 280 cm and a choice can be made in range up to 10 meter or 14 meter.

SG10 M/S series light grids

It is also possible to choose for a Master/Slave system where both the entrance side and the exit side of the application are fitted with a light grid. The conclusion is that at all times prevent entrapment, injury and damage to persons, vehicles or objects.

ULD 913 induction loop (single or double)

The ULD 913 from Hotron is an induction loop which is layed underground with a single or double coil for the detection of industrial vehicles in the access technology for example with gates or fences. Because of an output with permanent presence the closing of gates, doors and barriers are prevented in the case of a present static vehicle. This sensor is especially suited for the detection of high trailers of trucks and has 4 adjustable frequentie ranges (20-140 kHz). With just one controller it is possible to control two induction loops for a cost efficient solution.