These products have an IP67 sealing class. That means a completely closed housing and completely protected against dust. The products are suitable for wet environments. Water cannot penetrate when the product is immersed for a duration of up to 30 minutes at 1 meter depth.
The AH1/AN-4H is an inductive sensor in a stainless steel Ø 6.5 mm housing with a measuring range of up to 4 mm . The sensor is non-bondable, has an NPN (NO) switching output and is equipped with a 4-pin M12 connector.
The AH1/AN-2H is an inductive sensor in a stainless steel Ø 6.5 mm housing with a measuring range of up to 2.5 mm. The sensor is non-bondable, has an NPN (NO) switching output and is equipped with a 4-pin M12 connector.
The AH1/AP-2H is an inductive sensor in a stainless steel Ø 6.5 mm housing with a measuring range of up to 2.5 mm. The sensor is non-bondable, has an NPN (NC) switching output and is equipped with a 4-pin M12 connector.
The AH1/AP-4H is an inductive sensor in a stainless steel Ø 6.5 mm housing with a measuring range of up to 4 mm . The sensor is non-bondable, has an NPN (NC) switching output and is equipped with a 4-pin M12 connector.
The AH1/CN-2H is an inductive sensor in a stainless steel Ø 6.5 mm housing with a measuring range of up to 2.5 mm. The sensor is non-bondable, has a PNP (NO) switching output and is equipped with a 4-pin M12 connector.
The AH1/CN-4H is an inductive sensor in a stainless steel Ø 6.5 mm housing with a measuring range of up to 4 mm . The sensor is non-bondable, has a PNP (NO) switching output and is equipped with a 4-pin M12 connector.
The AH1/CP-2H is an inductive sensor in a stainless steel Ø 6.5 mm housing with a measuring range of up to 2.5 mm. The sensor is non-bondable, has a PNP (NC) switching output and is equipped with a 4-pin M12 connector.
The AH1/CP-4H is an inductive sensor in a stainless steel Ø 6.5 mm housing with a measuring range of up to 4 mm . The sensor is non-bondable, has a PNP (NC) switching output and is equipped with a 4-pin M12 connector.