These products have an IP67 sealing class. That means a completely closed housing and completely protected against dust. The products are suitable for wet environments. Water cannot penetrate when the product is immersed for a duration of up to 30 minutes at 1 meter depth.
The AE1/AP-1A is an inductive sensor in a stainless steel M8 housing with a measuring range of 1.5 mm. The sensor is flush mountable, has a PNP (NO) switching output and is equipped with a 2 m. fixed cable.
The AE1/AP-1F is an inductive sensor in a stainless steel M8 housing with a measuring range of 1.5 mm. The sensor is flush mountable, has a PNP (NO) switching output and is equipped with a 3-pin M8-connector.
The AE1/AP-1H is an inductive sensor in a stainless steel M8 housing with a measuring range of 1.5 mm. The sensor is flush mountable, has a PNP (NO) switching output and is equipped with a 4-pin M12-connector.
The AE1/AP-2A is an inductive sensor in a stainless steel M8 housing with a measuring range of 2.5 mm. The sensor is non-flush mountable, has a PNP (NO) switching output and is equipped with a 2 m. fixed cable.
The AE1/CP-4F is an inductive sensor in a stainless steel M8 housing with a measuring range of 4 mm. The sensor is non-flush mountable, has a PNP (NC) switching output and is equipped with a 3-pin M8 connector.
The AE1/CP-4H is an inductive sensor in a stainless steel M8 housing with a measuring range of 4 mm. The sensor is non-flush mountable, has a PNP (NC) switching output and is equipped with a 4-pin M12-connector.
The AE6/AN-1A is an inductive sensor in a stainless steel M8 housing (short body version) with a measuring range of 1.5 mm. The sensor is flush mountable, has a NPN (NO) switching output and is equipped with a 2 m. fixed cable.
The AE6/AN-1F is an inductive sensor in a stainless steel M8 housing (short body version) with a measuring range of 1.5 mm. The sensor is flush mountable, has a NPN (NO) switching output and is equipped with a 3-pin M8 connector.
The AE6/AN-2A is an inductive sensor in a stainless steel M8 housing (short body version) with a measuring range of 2.5 mm. The sensor is non-flush mountable, has a NPN (NO) switching output and is equipped with a 2 m. fixed cable.
The AE6/AN-2F is an inductive sensor in a stainless steel M8 housing (short body version) with a measuring range of 2.5 mm. The sensor is non-flush mountable, has a NPN (NO) switching output and is equipped with a 3-pin M8 connector.
The AE6/AN-2H is an inductive sensor in a stainless steel M8 housing (short body design) a measuring range of 2.5 mm. The sensor is non-bondable, has an NPN (NO) switching output and is equipped with a 4-pin M12 connector.
The AE6/AN-3A is an inductive sensor in a stainless steel M8 housing (short body design) a measuring range of 2 mm. The sensor can be built in concisely, has an NPN (NO) switching output and is equipped with a 2 m fixed cable.
The AE6/AN-3F is an inductive sensor in a stainless steel M8 housing (short body version) with a measuring range of 2 mm. The sensor is flush mountable, has a NPN (NO) switching output and is equipped with a 3-pin M8 connector.
The AE6/AN-4A is an inductive sensor in a stainless steel M8 housing (short body version) with a measuring range of 4 mm. The sensor is non-flush mountable, has a NPN (NO) switching output and is equipped with a 2 m. fixed cable.
The AE1/CP-2F is an inductive sensor in a stainless steel M8 housing with a measuring range of 2.5 mm. The sensor is non-flush mountable, has a PNP (NC) switching output and is equipped with a 3-pin M8 connector.
The AE6/AN-4F is an inductive sensor in a stainless steel M8 housing (short body version) with a measuring range of 4 mm. The sensor is non-flush mountable, has a NPN (NO) switching output and is equipped with a 3-pin M8 connector.