These products have an IP67 sealing class. That means a completely closed housing and completely protected against dust. The products are suitable for wet environments. Water cannot penetrate when the product is immersed for a duration of up to 30 minutes at 1 meter depth.
AT1/AN-3H is an inductive proximity switch in brass M30 housing with a 4-pin M12-connector and is equipped with a NPN NO switching output. The sensor is flush mounted with a range of 15 mm.
AT6/AN-1H is an inductive proximity switch in brass M30 housing with a 4-pin M12-connector and is equipped with a NPN NO switching output. The sensor is flush mounted with a range of 10 mm.
AT1/AP-3H is an inductive proximity switch in brass M30 housing with a 4-pin M12-connector and is equipped with a PNP NO switching output. The sensor is flush mounted with a range of 15 mm.
AT6/AP-1H is an inductive proximity switch in brass M30 housing with a 4-pin M12-connector and is equipped with a PNP NO switching output. The sensor is flush mounted with a range of 10 mm.
AT1/CN-3H is an inductive proximity switch in brass M30 housing with a 4-pin M12-connector and is equipped with a NPN NC switching output. The sensor is flush mounted with a range of 15 mm.
AT6/BN-1H is an inductive proximity switch in brass M30 housing with a 4-pin M12-connector and is equipped with a NPN (NO+NC) switching output. The sensor is flush mounted with a range of 10 mm.
AT1/CP-3H is an inductive proximity switch in brass M30 housing with a 4-pin M12-connector and is equipped with a PNP NC switching output. The sensor is flush mounted with a range of 15 mm.
AT6/BP-1H is an inductive proximity switch in brass M30 housing with a 4-pin M12-connector and is equipped with a PNP (NO+NC) switching output. The sensor is flush mounted with a range of 10 mm.
AT1/AN-4A is an inductive proximity switch in brass M30 housing with 2 meter fixed cable attached. The sensor is equipped with a NPN NO switching output. The sensor can be non-flush mounted with a range of 20 mm.
AT1/AP-4A is an inductive proximity switch in brass M30 housing with 2 meter fixed cable attached. The sensor is equipped with a PNP NO switching output. The sensor can be non-flush mounted with a range of 20 mm.
AT1/CN-4A is an inductive proximity switch in brass M30 housing with 2 meter fixed cable attached. The sensor is equipped with a NPN NC switching output. The sensor can be non-flush mounted with a range of 20 mm.
AT1/CP-4A is an inductive proximity switch in brass M30 housing with 2 meter fixed cable attached. The sensor is equipped with a PNP NC switching output. The sensor can be non-flush mounted with a range of 20 mm.
AT1/AN-4H is an inductive proximity switch in brass M30 housing with a 4-pin M12-connector and is equipped with a NPN NO switching output. The sensor is non-flush mounted with a range of 20 mm.
AT1/AP-4H is an inductive proximity switch in brass M30 housing with a 4-pin M12-connector and is equipped with a PNP NO switching output. The sensor is non-flush mounted with a range of 20 mm.
AT1/CN-4H is an inductive proximity switch in brass M30 housing with a 4-pin M12-connector and is equipped with a NPN NC switching output. The sensor is non-flush mounted with a range of 20 mm.
AT1/CP-4H is an inductive proximity switch in brass M30 housing with a 4-pin M12-connector and is equipped with a PNP NC switching output. The sensor is non-flush mounted with a range of 20 mm.