Available Filters
Filters

25 products found

Series
Switching frequency
Housing
Sealing class
Material
Power supply
Amount of outputs
Shopping Cart

No products in the cart.

Filter
  • XS8C2A4PCM12

    approximately 6 to 8 weeks

    The XS8C2A4PCM12 is a cube-shaped inductive sensor (40x40x70 mm) with 40 mm detection range. The sensor is equipped with a 4-pin M12-connector and has a PNP-NO+NC output.

  • PFM1 inductive sensoren Micro Detectors

    PFM1/BP-1H26

    approximately 6 to 8 weeks

    The PFM1/BP-1H26 is an inductive proximity switch from Micro Detectors in a metal M12 housing and equipped with a PNP NO+NC switching output. The sensor can be flush-mounted and has a range up to 2 mm. This sensor is suitable for applications with high temperatures: -25℃ tot 110℃.

    130,55 excl. VAT Add to cart
  • PFM1 Micro Detectors

    PFM1/BP-2H

    approximately 6 to 8 weeks

    The PFM1/BP-2H is an inductive proximity switch from Micro Detectors in an M12 housing, equipped with a PNP NO+NC switching output. The sensor can be flush-mounted and has a measuring range of 4 mm.

    62,63 excl. VAT Add to cart
  • PFM1 Micro Detectors

    PFM1/BP-2H26

    approximately 6 to 8 weeks

    The PFM1/BP-2H26 is an inductive proximity switch from Micro Detectors in a metal M12 and equipped with a PNP NO+NC switching output. The sensor is non-flush mountable and has a range up to 4 mm. This sensor is suitable for applications with high temperatures: -25℃ tot 110℃.

    130,55 excl. VAT Add to cart
  • PFM1 Micro Detectors

    PFM1/BP-2HAN

    approximately 6 to 8 weeks

    The PFM1/BP-2HAN is an ATEX certified inductive proximity switch from Micro Detectors in an M12 housing, equipped with PNP NO+NC switching output. The sensor is non-bondable and has a measuring range of 4 mm. The inductive proximity switch is suitable for ATEX II...

    84,56 excl. VAT Add to cart
  • PFM1 inductive sensoren Micro Detectors

    PFM1/BP-3H

    In stock

    The PFM1/BP-3H is an inductive proximity switch from Micro Detectors in a metal M12 and equipped with a PNP NO+NC switching output. The sensor can be flush-mounted and has a range up to 4 mm. This sensor is ECOLAB certified.

    62,63 excl. VAT Add to cart
  • PFM1 inductive sensoren Micro Detectors

    PFM1/BP-3HAN

    approximately 6 to 8 weeks

    The PFM1/BP-3HAN is an ATEX certified inductive proximity switch from Micro Detectors in an M12 housing, equipped with PNP NO+NC switching output. The sensor is bonded mountable and has a measuring range of 4 mm. The inductive proximity switch is suitable for ATEX II...

    84,55 excl. VAT Add to cart
  • PFM1 Micro Detectors

    PFM1/BP-4H

    In stock

    The PFM1/BP-4H is an inductive proximity switch from Micro Detectors in an M12 housing, equipped with a PNP NO+NC switching output. The sensor can be mounted non-flush and has a measuring range of 8 mm.

    65,14 excl. VAT Add to cart
  • PFM1 inductive sensoren Micro Detectors

    PFM1/BP-1H

    In stock

    The PFM1/BP-1H is an inductive proximity switch from Micro Detectors in an M12 housing, equipped with a PNP NO+NC switching output. The sensor can be flush-mounted and has a measuring range of 2 mm.

    62,63 excl. VAT Add to cart
  • PFK1 inductive sensor Micro Detectors

    PFK1/BP-3H

    In stock

    PFK1/BP-3H is an inductive proximity switch from Micro Detectors in a stainless steel M18 housing with a 4 conductor M12 connector and features a PNP NO+NC switching output. The sensor is concise to install and has a measurement range of 8...

    76,24 excl. VAT Add to cart
  • FMK6 inductive sensor Micro Detectors

    FMK6/BP-3H

    In stock

    FMK6/BP-3H is an inductive proximity switch with an IP69K protection class in stainless steel M18 housing with a 4-pin m12 connector and equipped with a PNP NO + NC switching output. The sensor can be flush-mounted with a range of up to 5 mm.

    66,62 excl. VAT Add to cart
  • FMES Inductive Sensor Micro Detectors

    FMES/CP-3F

    In stock

    The FMES/CP-3F is an inductive proximity switch with an IP69K protection class in a full metal M8 and equipped with a PNP NC switching output. The sensor can be flush-mounted and has a range up to 2 mm. This sensor is suitable for applications with extreme conditions.

    82,34 excl. VAT Add to cart
  • FMT6 inductive sensor Micro Detectors

    FMT6/BP-3H

    In stock

    The FMT6/BP-3H is an inductive proximity switch with an IP69K protection class in a full metal M30 housing and equipped with a PNP NO+NC switching output. The sensor can be flush-mounted and has a range up to 10 mm. This sensor is suitable for applications with extreme conditions.

    78,53 excl. VAT Add to cart
  • Stainless steel M18 Atex ECOLAB 4-pin M12 photocell

    FFRS/0P-1E

    approximately 6 to 8 weeks

    The FFRS 0P-1E from Micro Detectors is a diffuse proximity photocell with background suppression in an M18 stainless steel housing with ECOLAB certification, with a range of 30 - 130 mm. Due to the ECOLAB housing and IP68 and IP69K protection class, the...

    147,14 excl. VAT Add to cart
  • Stainless steel M18 Atex ECOLAB 4-pin M12 photocell

    FFI7/0P-1E

    In stock

    The FFI7/0P-1E from Micro Detectors is a diffuse proximity photocell with a range of up to 400 mm in a cylinder stainless steel housing. This photocell is suitable for applications in extreme conditions or in the food & beverages industry. The photocell has...

    113,60 excl. VAT Add to cart
  • Stainless steel M18 Atex ECOLAB 4-pin M12 photocell

    FFI8/0P-1E

    approximately 6 to 8 weeks

    The FFI8/0P-1E from Micro Detectors is a diffuse proximity photocell with a range of up to 800 mm in a cylinder stainless steel housing. This photocell is suitable for applications in extreme conditions or in the food & beverages industry. The photocell has...

    118,84 excl. VAT Add to cart