These products have an IP67 sealing class. That means a completely closed housing and completely protected against dust. The products are suitable for wet environments. Water cannot penetrate when the product is immersed for a duration of up to 30 minutes at 1 meter depth.
AE1/AN-2H
approximately 6 to 8 weeksThe AE1/AN-2H is an inductive sensor in a stainless steel M8 housing with a measuring range of 2.5 mm. The sensor is non-flush mountable, has a NPN (NO) switching output and is equipped with a 4-pin M12-connector.
€37,40 excl. VAT Add to cartAE1/AN-4H
approximately 6 to 8 weeksThe AE1/AN-4H is an inductive sensor in a stainless steel M8 housing with a measuring range of 4 mm. The sensor is non-flush mountable, has a NPN (NO) switching output and is equipped with a 4-pin M12-connector.
€44,73 excl. VAT Add to cartAE1/CN-2H
approximately 6 to 8 weeksThe AE1/CN-2H is an inductive sensor in a stainless steel M8 housing with a measuring range of 2.5 mm. The sensor is non-flush mountable, has a NPN (NC) switching output and is equipped with a 4-pin M12-connector.
€37,40 excl. VAT Add to cartAE1/CN-4H
approximately 6 to 8 weeksThe AE1/CN-4H is an inductive sensor in a stainless steel M8 housing with a measuring range of 4 mm. The sensor is non-flush mountable, has a NPN (NC) switching output and is equipped with a 4-pin M12-connector.
AE1/AP-2H
approximately 6 to 8 weeksThe AE1/AP-2H is an inductive sensor in a stainless steel M8 housing with a measuring range of 2.5 mm. The sensor is non-flush mountable, has a PNP (NO) switching output and is equipped with a 4-pin M12-connector.
€37,40 excl. VAT Add to cartAE1/AP-4H
approximately 6 to 8 weeksThe AE1/AP-4H is an inductive sensor in a stainless steel M8 housing with a measuring range of 4 mm. The sensor is non-flush mountable, has a PNP (NO) switching output and is equipped with a 4-pin M12-connector.
€44,73 excl. VAT Add to cartAE1/CP-2H
approximately 6 to 8 weeksThe AE1/CP-2H is an inductive sensor in a stainless steel M8 housing with a measuring range of 2.5 mm. The sensor is non-flush mountable, has a PNP (NC) switching output and is equipped with a 4-pin M12-connector.
€37,40 excl. VAT Add to cartAE1/CP-4H
approximately 6 to 8 weeksThe AE1/CP-4H is an inductive sensor in a stainless steel M8 housing with a measuring range of 4 mm. The sensor is non-flush mountable, has a PNP (NC) switching output and is equipped with a 4-pin M12-connector.
€45,60 excl. VAT Add to cartAE6/AN-2H
approximately 6 to 8 weeksThe AE6/AN-2H is an inductive sensor in a stainless steel M8 housing (short body design) a measuring range of 2.5 mm. The sensor is non-bondable, has an NPN (NO) switching output and is equipped with a 4-pin M12 connector.
approximately 6 to 8 weeks