These products have an IP67 sealing class. That means a completely closed housing and completely protected against dust. The products are suitable for wet environments. Water cannot penetrate when the product is immersed for a duration of up to 30 minutes at 1 meter depth.
ID2CA 0814E is an inductive proximity switch in cylindrical M8 x 30 mm brass housing with 2 meter fixed cable. The sensor has a PNP-NO output, is flush-mountable and has a detection range of 2 mm.
ID2CA 0815E is an inductive proximity switch in cylindrical M8 x 30 mm brass housing with 2 meter fixed cable. The sensor has a PNP-NC output, is flush-mountable and has a detection range of 2 mm.
The IO4CA 0814E is an inductive proximity switch in cylindrical M8 x 43 mm brass housing and 2 meter fixed cable. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 4 mm.
The IO4CA 0815E is an inductive proximity switch in cylindrical M8 x 43 mm brass housing and 2 meter fixed cable. The sensor has a PNP-C output, is non-flush mountable and has a detection range of 4 mm.
ID2LD 0814E is an inductive proximity switch in a cylindrical M8 x 41 mm brass housing with 3-pin M8-connector. The sensor has a PNP-NO output, is flush mountable and has a detection range of 2 mm.
ID2LD 0815E is an inductive proximity switch in a cylindrical M8 x 41 mm brass housing with 3-pin M8-connector. The sensor has a PNP-NC output, is flush mountable and has a detection range of 2 mm.
IO4LD 0814E is an inductive proximity switch in a cylindrical M8 x 41 mm brass housing with 3-pin M8-connector. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 455mm.
IO4LD 0815E is an inductive proximity switch in a cylindrical M8 x 41 mm brass housing with 3-pin M8-connector. The sensor has a PNP-NC output, is non-flush mountable and has a detection range of 4 mm.
The AE6/AP-4A is an inductive sensor in a stainless steel M8 housing (short body version) with a measuring range of 4 mm. The sensor is non-flush mountable, has a PNP (NO) switching output and is equipped with a 2 m. fixed cable.
The AE6/AP-3F is an inductive sensor in a stainless steel M8 housing (short body version) with a measuring range of 2 mm. The sensor is flush mountable, has a PNP (NO) switching output and is equipped with a 3-pin M8 connector.
AE6/AP-3A is an inductive proximity switch in brass M8 housing. With 2 meter fixed cable attached. The sensor is equipped with a PNP NO switching output. The sensor can be flush mounted with a range of 2 mm.
The AE6/AP-4F is an inductive sensor in a stainless steel M8 housing (short body version) with a measuring range of 4 mm. The sensor is non-flush mountable, has a PNP (NO) switching output and is equipped with a 3-pin M8 connector.
AE1 / AP-3A is an inductive proximity switch in brass M8 housing with a 2 meter PVC cable and equipped with a PNP NO switching output. The sensor can be flush-mounted with a range of 2 mm.
AE1/AP-3F is an inductive proximity switch in a stainless steel M8 housing with a range of 2 mm. The sensor is flush mountable, has a PNP (NO) switching output and is equipped with a 3-pin M8-connector.
The AE1/AN-4A is an inductive sensor in a stainless steel M8 housing with a measuring range of 4 mm. The sensor is non-flush mountable, has a NPN (NO) switching output and is equipped with a 2 m. fixed cable.
The AE1/AN-4F is an inductive sensor in a stainless steel M8 housing with a measuring range of 4 mm. The sensor is non-flush mountable, has a NPN (NO) switching output and is equipped with a 3-pin M8-connector.