Available Filters
Filters

59 products found

Series
Output
Switching frequency
Housing
Sealing class
Material
Power supply
Response time
Amount of outputs
Shopping Cart

Subtotal: 42,37

View cartGo to checkout

These products have an IP67 sealing class. That means a completely closed housing and completely protected against dust. The products are suitable for wet environments. Water cannot penetrate when the product is immersed for a duration of up to 30 minutes at 1 meter depth.

Filter
  • mic-130/D/M

    In stock

    The mic-130/D/M is an ultrasonic sensor in all-metal M30 housing and a range from 200 up to 2,000 mm and 1 x PNP switching output. Also available in ATEX version: mic-130/D/M/EXII3D

    178,10 excl. VAT Add to cart
  • microsonic ultrasonic sensor pico+15/xx

    pico+15/F

    approximately 2 to 4 weeks

    pico+15/F is an M18 ultrasonic sensor with 1 x PNP/NPN switching output, IO-Link interface and a range of 20 to 250 mm. The pico+15/F is also available in an ATEX version. NOTE: The pico+15/F has been replaced by the pico+15 De...

  • SMRR 8500 MG 5

    In stock

    The SMRR 8500 MG 5 is a retro reflective photocell with a range of up to 300 cm. in stainless steel M18 housing. The photocell has 5m. fixed cable and is PNP-NO+NC adjustable. The SMRR 8500 MG 5 is also available in a...

  • LR G 30 EX 15

    approximately 6 to 8 weeks

    The LT G 30 EX 15 from Telco Sensors is an explosion-proof photocell transmitter, which is used in combination with the PA(B) amplifier. (Ex) d 3n G5 in accordance with VDE 0171. Zone Ex II 2 G/D EExd IIC T6 according to EXC Directive....

  • LT G 30 EX 15

    approximately 6 to 8 weeks

    The LT G 30 EX 15 from Telco Sensors is an explosion-proof photocell transmitter, which is used in combination with the PA(B) amplifier. (Ex) d 3n G5 in accordance with VDE 0171. Zone Ex II 2 G/D EExd IIC T6 according to EXC Directive....

  • PFM1 Micro Detectors

    PFM1/BP-2HAN

    approximately 6 to 8 weeks

    The PFM1/BP-2HAN is an ATEX certified inductive proximity switch from Micro Detectors in an M12 housing, equipped with PNP NO+NC switching output. The sensor is non-bondable and has a measuring range of 4 mm. The inductive proximity switch is suitable for ATEX II...

    84,56 excl. VAT Read more
  • PFM1 inductive sensoren Micro Detectors

    PFM1/BP-3HAN

    approximately 6 to 8 weeks

    The PFM1/BP-3HAN is an ATEX certified inductive proximity switch from Micro Detectors in an M12 housing, equipped with PNP NO+NC switching output. The sensor is bonded mountable and has a measuring range of 4 mm. The inductive proximity switch is suitable for ATEX II...

    84,55 excl. VAT Read more
  • inductive sensor AK1 Micro Detectors

    AK1/AP-3H

    In stock

    AK1/AP-3H is an inductive proximity switch in brass M18 housing. With a 4-pin M12 connector and equipped with a PNP NO switching output. The sensor can be flush mounted with a range of 8 mm.

    48,74 excl. VAT Read more
  • AK1 inductive sensor Micro Detectors

    AK1/AP-2HAN

    approximately 6 to 8 weeks

    AK1/AP-2HAN is an ATEX certified inductive proximity switch in a brass M18 housing with 4-pin M12 connector and has a PNP NO switch output. The sensor is non-bonding with a range of 8 mm. This sensor is suitable for II 3G...

    50,49 excl. VAT Read more
  • microsonic ultrasonic sensor pico+15/xx

    pico+15/F/A

    In stock

    The microsonic pico+15/F/A is ultrasonic sensor with a range from 20 up to 250 mm and 1 x PNP/NPN switching output and IO-Link interface 1.1 with Smart Sensor Profile.

    183,70 excl. VAT Read more
  • Stainless steel M18 Atex ECOLAB 4-pin M12 photocell

    FFI7/0N-1E

    approximately 6 to 8 weeks

    The FFI7/0N-1E from Micro Detectors is a diffuse proximity photocell with a range of up to 400 mm in a cylinder stainless steel housing. This photocell is suitable for applications in extreme conditions or in the food & beverages industry. The photocell has...

    113,60 excl. VAT Read more
  • Stainless steel M18 Atex ECOLAB 4-pin M12 photocell

    FFI7/0P-1E

    In stock

    The FFI7/0P-1E from Micro Detectors is a diffuse proximity photocell with a range of up to 400 mm in a cylinder stainless steel housing. This photocell is suitable for applications in extreme conditions or in the food & beverages industry. The photocell has...

    113,60 excl. VAT Read more
  • Stainless steel M18 Atex ECOLAB 4-pin M12 photocell

    FFI7/BN-1E

    approximately 6 to 8 weeks

    The FFI7/BN-1E from Micro Detectors is a diffuse proximity photocell with a range of up to 400 mm in a cylinder stainless steel housing. This photocell is suitable for applications in extreme conditions or in the food & beverages industry. The photocell has...

    113,60 excl. VAT Read more
  • Stainless steel M18 Atex ECOLAB 4-pin M12 photocell

    FFI7/BP-1E

    In stock

    The FFI7/BP-1E from Micro Detectors is a diffuse proximity photocell with a range of up to 400 mm in a cylinder stainless steel housing. This photocell is suitable for applications in extreme conditions or in the food & beverages industry. The photocell has...

    113,60 excl. VAT Read more
  • Stainless steel M18 Atex ECOLAB 4-pin M12 photocell

    FFI8/0N-1E

    approximately 6 to 8 weeks

    The FFI8/0N-1E from Micro Detectors is a diffuse proximity photocell with a range of up to 800 mm in a cylinder stainless steel housing. This photocell is suitable for applications in extreme conditions or in the food & beverages industry. The photocell has...

    118,84 excl. VAT Read more
  • Stainless steel M18 Atex ECOLAB 4-pin M12 photocell

    FFI8/0P-1E

    approximately 6 to 8 weeks

    The FFI8/0P-1E from Micro Detectors is a diffuse proximity photocell with a range of up to 800 mm in a cylinder stainless steel housing. This photocell is suitable for applications in extreme conditions or in the food & beverages industry. The photocell has...

    118,84 excl. VAT Read more