Available Filters
Filters

522 products found

Series
Switching frequency
Sealing class
Interface
Laser class
Response time
Amount of outputs
Accuracy
Shopping Cart

Subtotal: 91.316,46

View cartGo to checkout

These products have an IP67 sealing class. That means a completely closed housing and completely protected against dust. The products are suitable for wet environments. Water cannot penetrate when the product is immersed for a duration of up to 30 minutes at 1 meter depth.

Filter
  • SMP 8500 MG J

    In stock

    The SMP 8500 MG J is a photocell probe with a range of up to 50 cm. in stainless steel M18 housing. The photocell has a 4-pin M12 connector and is PNP-NO+NC adjustable. Due to the round optics and high excess gain, very insensitive to...

  • SMP 8500 PG J

    In stock

    The SMP 8500 PG J is a photocell probe with a range of up to 50 cm. in plastic M18 housing. The photocell has a 4-pin M12 connector and is PNP-NO+NC adjustable. Due to the round optics and high excess gain, very insensitive to...

  • SMP 8500 MG 5

    In stock

    The SMP 8500 MG 5 is a photocell probe with a range of up to 50 cm in stainless steel M18 housing. The photocell has a 5 m. fixed cable and is PNP-NO+NC adjustable. Due to the round optics and high excess gain, very insensitive to...

  • SMP 8500 PG 5

    In stock

    The SMP 8500 PG 5 is a photocell probe with a range of up to 50 cm. in plastic M18 housing. The photocell has a 5 m. fixed cable and is PNP-NO+NC adjustable. Due to the round optics and high excess gain, very insensitive to...

  • ID2MD shoebuch inductive sensor

    ID2MD 6515C

    approximately 2 to 4 weeks
  • IO4CA shoebuch inductive sensor

    IO4CA 0814E

    In stock

    The IO4CA 0814E is an inductive proximity switch in cylindrical M8 x 43 mm brass housing and 2 meter fixed cable. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 4 mm.

    42,67 excl. VAT Add to cart
  • IO4CA shoebuch inductive sensor

    IO4CA 0815E

    approximately 2 to 4 weeks

    The IO4CA 0815E is an inductive proximity switch in cylindrical M8 x 43 mm brass housing and 2 meter fixed cable. The sensor has a PNP-C output, is non-flush mountable and has a detection range of 4 mm.

    42,67 excl. VAT Add to cart
  • IO4LD shoebuch indcutive sensor

    IO4LD 0814E

    approximately 2 to 4 weeks

    IO4LD 0814E is an inductive proximity switch in a cylindrical M8 x 41 mm brass housing with 3-pin M8-connector. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 455mm.

    42,67 excl. VAT Add to cart
  • IO4LD shoebuch indcutive sensor

    IO4LD 0815E

    approximately 2 to 4 weeks

    IO4LD 0815E is an inductive proximity switch in a cylindrical M8 x 41 mm brass housing with 3-pin M8-connector. The sensor has a PNP-NC output, is non-flush mountable and has a detection range of 4 mm.

    42,67 excl. VAT Add to cart
  • IP8CT 1214E

    In stock

    The IP8CT 1214E is an inductive proximity switch in cylindrical M12 x 50 mm brass housing and 2 meter fixed cable. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 8 mm.

    47,60 excl. VAT Add to cart
  • IP8CT 1215E

    In stock

    The IP8CT 1215E is an inductive proximity switch in cylindrical M12 x 50 mm brass housing and 2 meter fixed cable. The sensor has a PNP-NC output, is non-flush mountable and has a detection range of 8 mm.

    38,96 excl. VAT Add to cart
  • IO8LI 1214E

    In stock

    IO8LI 1214E is an inductive proximity switch in a cylindrical M12 x 46 mm brass housing with 4-pin M12-connector. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 8 mm.

    38,96 excl. VAT Add to cart
  • IO8LI 1215E

    approximately 2 to 4 weeks

    IO8LI 1215E is an inductive proximity switch in a cylindrical M12 x 46 mm brass housing with 4-pin M12-connector. The sensor has a PNP-NC output, is non-flush mountable and has a detection range of 8 mm.

    38,96 excl. VAT Add to cart
  • IP12CT 1814E

    approximately 2 to 4 weeks

    The IP12CT 1814E is an inductive proximity switch in cylindrical M18 x 53 mm brass housing and 2 meter fixed cable. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 12 mm.

    44,89 excl. VAT Add to cart
  • IP12CT 1815E

    In stock

    The IP12CT 1815E is an inductive proximity switch in cylindrical M18 x 53 mm brass housing and 2 meter fixed cable. The sensor has a PNP-NC output, is non-flush mountable and has a detection range of 12 mm.

    44,89 excl. VAT Add to cart
  • IO20CT 3014E

    In stock

    The IO20CT 3014E is an inductive proximity switch in cylindrical M30 x 56 mm brass housing and 2 meter fixed cable. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 20 mm.

    57,51 excl. VAT Add to cart