These products have an IP67 sealing class. That means a completely closed housing and completely protected against dust. The products are suitable for wet environments. Water cannot penetrate when the product is immersed for a duration of up to 30 minutes at 1 meter depth.
AK1/AP-2HAN is an ATEX certified inductive proximity switch in a brass M18 housing with 4-pin M12 connector and has a PNP NO switch output. The sensor is non-bonding with a range of 8 mm. This sensor is suitable for II 3G...
AK1/AP-2AAN is an ATEX certified inductive proximity switch in a brass M18 housing with 2m fixed cable and has a PNP NO switch output. The sensor is non-bonding with a range of 8mm. This sensor is suitable for II 3G...
AK1/AP-2H is an inductive proximity switch in brass M18 housing. With a 4-pin M12 connector and equipped with a PNP NO switching output. The sensor can be non-flush mounted with a range of 8 mm.
The AK1/AN-2A is an inductive proximity switch from Micro Detectors in a brass M18 housing. The sensor is non-flush mountable, has a range of 8 mm, a NPN (NO) switching output and is equipped with a 2 m. fixed cable.
The AK1/AP-2A is an inductive proximity switch from Micro Detectors in a brass M18 housing. The sensor is non-flush mountable, has a range of 8 mm, a PNP (NO) switching output and is equipped with a 2 m. fixed cable.
The AK1/CN-2A is an inductive proximity switch from Micro Detectors in a brass M18 housing. The sensor is non-flush mountable, has a range of 8 mm, a NPN (NC) switching output and is equipped with a 2 m. fixed cable.
The AK1/CP-2A is an inductive proximity switch from Micro Detectors in a brass M18 housing. The sensor is non-flush mountable, has a range of 8 mm, a PNP (NC) switching output and is equipped with a 2 m. fixed cable.
The AK1/AN-2C is an inductive proximity switch from Micro Detectors in a brass M18 housing. The sensor is non-bondable, has an 8-mm measurement range, an NPN (NO) switching output and features an angled 2m. fixed...
The AK1/AP-2C is an inductive proximity switch from Micro Detectors in a brass M18 housing. The sensor is non-bondable, has an 8-mm measurement range, a PNP (NO) switching output and features an angled 2m. fixed...
The AK1/CN-2C is an inductive proximity switch from Micro Detectors in a brass M18 housing. The sensor is non-bondable, has an 8-mm measurement range, an NPN (NC) switching output and is equipped with an angled 2m. fixed...
The AK1/CP-2C is an inductive proximity switch from Micro Detectors in a brass M18 housing. The sensor is non-bondable, has an 8-mm measurement range, a PNP (NC) switching output and features an angled 2m. fixed...
The AK1/AN-2H is an inductive proximity switch from Micro Detectors in a brass M18 housing. The sensor is non-flush mountable, has a range of 8 mm, a NPN (NO) switching output and is equipped with a 4-pin M12-connector.
The AK1/AN-4A is an inductive proximity switch from Micro Detectors in a brass M18 housing. The sensor is non-flush mountable, has a range of 12 mm, a NPN (NO) switching output and is equipped with a 2 m. fixed cable.
The AK1/AP-4A is an inductive proximity switch from Micro Detectors in a brass M18 housing. The sensor is non-flush mountable, has a range of 12 mm, a PNP (NO) switching output and is equipped with a 2 m. fixed cable.
The AK1/CN-4A is an inductive proximity switch from Micro Detectors in a brass M18 housing. The sensor is non-flush mountable, has a range of 12 mm, a NPN (NC) switching output and is equipped with a 2 m. fixed cable.
The AK1/CP-4A is an inductive proximity switch from Micro Detectors in a brass M18 housing. The sensor is non-flush mountable, has a range of 12 mm, a PNP (NC) switching output and is equipped with a 2 m. fixed cable.