These products have an IP67 sealing class. That means a completely closed housing and completely protected against dust. The products are suitable for wet environments. Water cannot penetrate when the product is immersed for a duration of up to 30 minutes at 1 meter depth.
The SPPR 2610T J is a retro-reflective photelectric sensor with a range of 10 meters, a PNP switching output and rotatable M12-connector. Sensitivity and on/off delay are adjustable via potentiometer. Mounting bracket included, reflector sold separately.
The PFM1/AN-4H is an inductive proximity switch from Micro Detectors in an M12 housing, equipped with a NPN NO switching output. The sensor can be non-flush mounted and has a measuring range of 8 mm.
The PFM1/AN-1H is an inductive proximity from Micro Detectors switch in a metal M12 housing and equipped with a NPN-NO switching output. The sensor is flush mountable and has a range up to 2 mm.
The PFM1/AN-2H is an inductive proximity switch from Micro Detectors in an M12 housing, equipped with a NPN NO switching output. The sensor can be non-flush mounted and has a measuring range of 4 mm.
The PFM1/AN-3H is an inductive proximity from Micro Detectors switch in a metal M12 housing and equipped with a NPN-NO switching output. The sensor is flush mountable and has a range up to 4 mm.
AK1/A0-3A is an inductive proximity switch in brass M18 housing. With 2 meter fixed cable attached. The sensor is equipped with a PNP NO and NPN NO switching output. The sensor can be flush mounted with a range of 8 mm.
AK1/A0-3H is an inductive proximity switch in brass M18 housing with a 4-pin M12-connector and is equipped with a PNP NO and NPN NO switching output. The sensor is flush mountable and has a range of 8 mm.
The PFK1/AN-1H is an inductive proximity switch from Micro Detectors in a stainless steel M18 housing with a 4-wire M12 connector and features an NPN (NO) switching output. The sensor is concise to install and has a measurement range of 5 mm....
The AM1/AN-1A is an inductive proximity switch in brass M12 housing with a 2 m. fixed cable connection and a NPN (NO) switching output. The sensor can be flush-mounted and has a range of 2 mm.
CQ50/AN-1A is a capacitive proximity switch in a rectangular plastic housing. The sensor is flush mountable, with a range of 5 mm, a 2 m. fixed cable and a NPN (NO) switching output.
CQ50/AN-2A is a capacitive proximity switch in a rectangular plastic housing. The sensor is flush mountable, with a range of 6 mm, a 2 m. fixed cable and a NPN (NO) switching output.