These products have an IP67 sealing class. That means a completely closed housing and completely protected against dust. The products are suitable for wet environments. Water cannot penetrate when the product is immersed for a duration of up to 30 minutes at 1 meter depth.
IO4CA 0814E
In stockThe IO4CA 0814E is an inductive proximity switch in cylindrical M8 x 43 mm brass housing and 2 meter fixed cable. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 4 mm.
€42,67 excl. VAT Add to cartIO4LD 0814E
approximately 2 to 4 weeksIO4LD 0814E is an inductive proximity switch in a cylindrical M8 x 41 mm brass housing with 3-pin M8-connector. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 455mm.
€42,67 excl. VAT Add to cartIP8CT 1214E
In stockThe IP8CT 1214E is an inductive proximity switch in cylindrical M12 x 50 mm brass housing and 2 meter fixed cable. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 8 mm.
€47,60 excl. VAT Add to cartIO8LI 1214E
In stockIO8LI 1214E is an inductive proximity switch in a cylindrical M12 x 46 mm brass housing with 4-pin M12-connector. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 8 mm.
€38,96 excl. VAT Add to cartIP12CT 1814E
approximately 2 to 4 weeksThe IP12CT 1814E is an inductive proximity switch in cylindrical M18 x 53 mm brass housing and 2 meter fixed cable. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 12 mm.
€44,89 excl. VAT Add to cartIO20CT 3014E
In stockThe IO20CT 3014E is an inductive proximity switch in cylindrical M30 x 56 mm brass housing and 2 meter fixed cable. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 20 mm.
€57,51 excl. VAT Add to cartIO20LI 3014E
In stockIO20LI 3014E is an inductive proximity switch in a cylindrical M30 x 52 mm brass housing with 4-pin M12-connector. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 20 mm.
€67,13 excl. VAT Add to cartAK1/AP-2HAN
approximately 6 to 8 weeksAK1/AP-2HAN is an ATEX certified inductive proximity switch in a brass M18 housing with 4-pin M12 connector and has a PNP NO switch output. The sensor is non-bonding with a range of 8 mm. This sensor is suitable for II 3G...
€50,49 excl. VAT Add to cartAM6/AP-4H
approximately 6 to 8 weeksThe AM6/AP-4H is an inductive proximity switch in brass M12 housing with a 4-pin M12 connector and a PNP (NO) switching output. The sensor is non-flush mounted and has a range of 8 mm.
€38,72 excl. VAT Add to cartAM6/AP-4A
In stockThe AM6/AP-4A is an inductive proximity switch in a brass M12 housing with a 2m. fixed cable connection and a PNP (NO) switching output. The sensor is non-flush mounted and has a range of 8 mm.
€36,05 excl. VAT Add to cartAM6/AP-2H
In stockThe AM6/AP-2H is an inductive proximity switch in brass M12 housing with a 4-pin M12 connector and a PNP (NO) switching output. The sensor is non-flush mounted and has a range of 4 mm.
€32,04 excl. VAT Add to cartAM6/AP-2A
approximately 6 to 8 weeksThe AM6/AP-2A is an inductive proximity switch in a brass M12 housing with a 2m. fixed cable connection and a PNP (NO) switching output. The sensor is non-flush mounted and has a range of 4 mm.
€29,38 excl. VAT Add to cartAE6/AP-4A
approximately 6 to 8 weeksThe AE6/AP-4A is an inductive sensor in a stainless steel M8 housing (short body version) with a measuring range of 4 mm. The sensor is non-flush mountable, has a PNP (NO) switching output and is equipped with a 2 m. fixed cable.
€38,72 excl. VAT Add to cartAE6/AP-4F
In stockThe AE6/AP-4F is an inductive sensor in a stainless steel M8 housing (short body version) with a measuring range of 4 mm. The sensor is non-flush mountable, has a PNP (NO) switching output and is equipped with a 3-pin M8 connector.
€41,39 excl. VAT Add to cartIOLI 3014
approximately 2 to 4 weeksIOLI 3014 is an inductive proximity switch in a cylindrical M30 x 52 mm brass housing with 4-pin M12-connector. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 15 mm.
€48,64 excl. VAT Add to cartAM1/AP-2A
approximately 6 to 8 weeksThe AM1/AP-2A is an inductive proximity switch in brass M12 housing with a 2 m. fixed cable connection and an PNP (NO) switching output. The sensor can be non-flush mounted and has a range of 4 mm.
€29,38 excl. VAT Add to cart
In stock
approximately 2 to 4 weeks
