These products have an IP67 sealing class. That means a completely closed housing and completely protected against dust. The products are suitable for wet environments. Water cannot penetrate when the product is immersed for a duration of up to 30 minutes at 1 meter depth.
ews-100/M18/CD ultrasonic sensor with separate transmitter + receiver in M18 housing. Ranging from 100 up to 2,500 mm with a 1 x PNP switching output. Ideal for fast detection applications with transparent materials on conveyor belts.
The AM1/A0-3H is an inductive proximity switch in brass M12 housing with a 4-pin M12 connector and a PNP/NPN (NO) switching output. The sensor is non-flush mounted and has a range of 4 mm.
The AM1/A0-3A is an inductive proximity switch in brass M12 housing with a 4-pin M12 connector and a PNP/NPN (NO) switching output. The sensor is non-flush mounted and has a range of 4 mm.
The AM1/A0-4A is an inductive proximity switch in brass M12 housing with a 4-pin M12 connector and a PNP/NPN (NO) switching output. The sensor is non-flush mounted and has a range of 8 mm.
The AM1/A0-4H is an inductive proximity switch in brass M12 housing with a 4-pin M12 connector and a PNP/NPN (NO) switching output. The sensor is non-flush mounted and has a range of 8 mm.
The IBAC 1812 is an inductive sensor in a stainless steel M18 housing and a measuring range of 5 mm. The sensor is concise to install, has an NPN (NO) switching output and is equipped with an output with 3 m. fixed...
The IBAC 1812/EX is an inductive sensor in a stainless steel M18 housing and a measuring range of 5 mm. The sensor is concise to install, has an NPN (NO) switching output and is equipped with an output with 5 m. fixed...
The IBAC 1814 is an inductive sensor in a stainless steel M18 housing and a measuring range of 5 mm. The sensor is concise to install, has a PNP (NO) switching output and is equipped with an output with 3 m. fixed...
The IBAC 3012 is an inductive sensor in a stainless steel M30 housing and a measuring range of 5 mm. The sensor is concise to install, has an NPN (NO) switching output and is equipped with an output with 3 m. fixed...
The IBAC 3012/EX is an inductive sensor in a stainless steel M30 housing and a measuring range of 5 mm. The sensor is concise to install, has an NPN (NO) switching output and is equipped with an output with 5 m. fixed...
The IBAC 3014 is an inductive sensor in a stainless steel M30 housing and a measuring range of 5 mm. The sensor is concise to install, has a PNP (NO) switching output and is equipped with an output with 3 m. fixed...
AT1/CP-1H is an inductive proximity switch in brass M30 housing with a 4-pin M12-connector and is equipped with a PNP NC switching output. The sensor is flush mounted with a range of 10 mm.
AT1/AN-2A is an inductive proximity switch in brass M30 housing with a 2 meter fixed cable and is equipped with a NPN NO switching output. The sensor is non-flush mounted with a range of 15 mm.
AT1/AP-2A is an inductive proximity switch in brass M30 housing with 2 meter fixed cable attached. The sensor is equipped with a PNP NO switching output. The sensor can be non-flush mounted with a range of 15 mm.
AT1/CN-2A is an inductive proximity switch in brass M30 housing with 2 meter fixed cable attached. The sensor is equipped with a NPN NC switching output. The sensor can be non-flush mounted with a range of 15 mm.
AT1/CP-2A is an inductive proximity switch in brass M30 housing with 2 meter fixed cable attached. The sensor is equipped with a PNP NC switching output. The sensor can be non-flush mounted with a range of 15 mm.