ID2LD 0814E is an inductive proximity switch in a cylindrical M8 x 41 mm brass housing with 3-pin M8-connector. The sensor has a PNP-NO output, is flush mountable and has a detection range of 2 mm.
ID2LD 0815E is an inductive proximity switch in a cylindrical M8 x 41 mm brass housing with 3-pin M8-connector. The sensor has a PNP-NC output, is flush mountable and has a detection range of 2 mm.
IO4LD 0814E is an inductive proximity switch in a cylindrical M8 x 41 mm brass housing with 3-pin M8-connector. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 455mm.
IO4LD 0815E is an inductive proximity switch in a cylindrical M8 x 41 mm brass housing with 3-pin M8-connector. The sensor has a PNP-NC output, is non-flush mountable and has a detection range of 4 mm.
The IBLD 0514 is an inductive proximity switch with 0.8 mm detection range in M5 screw thread housing. The sensor is flush mountable has a PNP-NO switching output. The sensor is equipped with a 3-pin M8-connector.
IBLD 0513 is an inductive proximity switch in a cylindrical M5 x 1.5 mm stainless steel housing with 2 m fixed cable. The sensor has an NPN-NC output and has a detection range of 0.8 mm.
IBLD 0512 is an inductive proximity switch in a cylindrical M5 x 1.5 mm stainless steel housing with 2 m fixed cable. The sensor has an NPN-NO output and has a detection range of 0.8 mm.
SMT 3000HC S30 0,15 T3 is a photoelectric transmitter in snap-in design housing with 15 cm pigtail connector. This version is widely used for doors and gates because of the discreet installation method. The range of the sensor is 15 meters.
SMR 3215 S30 0.15 T3 is a photoelectric receiver in snap-in design housing with 15 cm pigtail connector and PNP-NC output. This edition is used frequently in doors and gates because of the discreet mounting. the range of the sensor is 15 meters.
SMR 3206 S30 0.15 T3 is a photoelectric receiver in snaphousing with 15 cm pigtail connector and PNP-NC output. This version is widely used for doors and gates because of the discrete installation method. The range of the sensor is 6 meters.
SMT 3000C S30 0,15 T3 is a photoelectric transmitter in snap-in design housing with 15 cm pigtail connector. This version is widely used for doors and gates because of the discreet installation method. The range of the sensor is 6 meters.
The AE6/AP-3F is an inductive sensor in a stainless steel M8 housing (short body version) with a measuring range of 2 mm. The sensor is flush mountable, has a PNP (NO) switching output and is equipped with a 3-pin M8 connector.
The AE6/AP-4F is an inductive sensor in a stainless steel M8 housing (short body version) with a measuring range of 4 mm. The sensor is non-flush mountable, has a PNP (NO) switching output and is equipped with a 3-pin M8 connector.
AE1/AP-3F is an inductive proximity switch in a stainless steel M8 housing with a range of 2 mm. The sensor is flush mountable, has a PNP (NO) switching output and is equipped with a 3-pin M8-connector.
In stock
approximately 2 to 4 weeks
