XS130BHPAM12 is an inductive proximity switch in brass M30 housing with a 4-wire M12 connection and is equipped with a PNP-NO switching output. The sensors is
The IBAC 3012 is an inductive sensor in a stainless steel M30 housing and a measuring range of 5 mm. The sensor is concise to install, has an NPN (NO) switching output and is equipped with an output with 3 m. fixed...
The IBAC 3012/EX is an inductive sensor in a stainless steel M30 housing and a measuring range of 5 mm. The sensor is concise to install, has an NPN (NO) switching output and is equipped with an output with 5 m. fixed...
The IBAC 3014 is an inductive sensor in a stainless steel M30 housing and a measuring range of 5 mm. The sensor is concise to install, has a PNP (NO) switching output and is equipped with an output with 3 m. fixed...
The IBAC 3014/EX is an inductive sensor in a stainless steel M30 housing and a measuring range of 5 mm. The sensor is concise to install, has a PNP (NO) switching output and is equipped with an output with 5 m. fixed...
AT1/AP-2A is an inductive proximity switch in brass M30 housing with 2 meter fixed cable attached. The sensor is equipped with a PNP NO switching output. The sensor can be non-flush mounted with a range of 15 mm.
AT1/CN-2A is an inductive proximity switch in brass M30 housing with 2 meter fixed cable attached. The sensor is equipped with a NPN NC switching output. The sensor can be non-flush mounted with a range of 15 mm.
AT1/CP-2A is an inductive proximity switch in brass M30 housing with 2 meter fixed cable attached. The sensor is equipped with a PNP NC switching output. The sensor can be non-flush mounted with a range of 15 mm.
AT1/AN-2H is an inductive proximity switch in brass M30 housing with a 4-pin M12-connector and is equipped with a NPN NO switching output. The sensor is non-flush mounted with a range of 15 mm.
AT1/AP-2H is an inductive proximity switch in brass M30 housing with a 4-pin M12-connector and is equipped with a PNP NO switching output. The sensor is non-flush mounted with a range of 15 mm.
AT1/CN-2H is an inductive proximity switch in brass M30 housing with a 4-pin M12-connector and is equipped with a NPN NC switching output. The sensor is non-flush mounted with a range of 15 mm.
AT1/CP-2H is an inductive proximity switch in brass M30 housing with a 4-pin M12-connector and is equipped with a PNP NC switching output. The sensor is non-flush mounted with a range of 15 mm.
AT1/AN-1A is an inductive proximity switch in brass M30 housing with a 2 meter fixed cable and is equipped with a NPN NO switching output. The sensor is flush mounted with a range of 10 mm.
AT1/AN-3A is an inductive proximity switch in brass M30 housing with a 2 meter fixed cable and is equipped with a NPN NO switching output. The sensor is flush mounted with a range of 15 mm.
AT1/AP-1A is an inductive proximity switch in brass M30 housing with a 2 meter fixed cable and is equipped with a PNP NO switching output. The sensor is flush mounted with a range of 10 mm.
AT1/AP-3A is an inductive proximity switch in brass M30 housing with 2 meter fixed cable attached. The sensor is equipped with a PNP NO switching output. The sensor can be flush mounted with a range of 15 mm.