The SMP 8500 MG J is a photocell probe with a range of up to 50 cm. in stainless steel M18 housing. The photocell has a 4-pin M12 connector and is PNP-NO+NC adjustable. Due to the round optics and high excess gain, very insensitive to...
The SMP 8500 PG J is a photocell probe with a range of up to 50 cm. in plastic M18 housing. The photocell has a 4-pin M12 connector and is PNP-NO+NC adjustable. Due to the round optics and high excess gain, very insensitive to...
The SMP 8500 MG 5 is a photocell probe with a range of up to 50 cm in stainless steel M18 housing. The photocell has a 5 m. fixed cable and is PNP-NO+NC adjustable. Due to the round optics and high excess gain, very insensitive to...
The SMRR 8500 MG 5 is a retro reflective photocell with a range of up to 300 cm. in stainless steel M18 housing. The photocell has 5m. fixed cable and is PNP-NO+NC adjustable. The SMRR 8500 MG 5 is also available in a...
The SMRR 8500 MG J is a retro-reflective photoelectric sensor in stainless steel M18 housing with a range of up to 300 cm. The sensor has a 4-pin M12-connector and is PNP NO+NC adjustable.
SPBS 2602T J is a cubic photoelectric sensor with background suppression, 200 cm range, rotatable 4-pin M12 connector and PNP/NPN output. The sensitivity and On/Off delay is adjustable via potentiometer.
SPBS 2600 J is a cubic photoelectric sensor with background suppression, 50 cm range, rotatable 4-pin M12 connector and PNP/NPN output. The sensitivity is adjustable via potentiometer.
SMP 8501 MG J is a photocell probe with a range of up to 100 cm. in stainless steel M18 housing. The photocell has a 4-pin M12 connector and is PNP-NO+NC adjustable. Due to the round optics and high excess gain, very insensitive to dirt and...
AK1/AP-2HAN is an ATEX certified inductive proximity switch in a brass M18 housing with 4-pin M12 connector and has a PNP NO switch output. The sensor is non-bonding with a range of 8 mm. This sensor is suitable for II 3G...
XS130BHPAM12 is an inductive proximity switch in brass M30 housing with a 4-wire M12 connection and is equipped with a PNP-NO switching output. The sensors is
AK1/A0-3A is an inductive proximity switch in brass M18 housing. With 2 meter fixed cable attached. The sensor is equipped with a PNP NO and NPN NO switching output. The sensor can be flush mounted with a range of 8 mm.
AK1/A0-3H is an inductive proximity switch in brass M18 housing with a 4-pin M12-connector and is equipped with a PNP NO and NPN NO switching output. The sensor is flush mountable and has a range of 8 mm.