Industrial doors
Fast door activation by means of directional hybrid radar and infrared sensors up to a height of 7 meters. Underground induction loops with single or double coil for reliable detection of industrial vehicles. EN 12453 approved underrun protection by means of light grids or in outdoor application with IP69K photoelectric sensors. Especially for small to large industrial doors, overhead doors, high-speed doors, etc. Employees and goods are protected at all times in and around the door closing zone!
-
SMR 9270 TP 15
approximately 6 to 8 weeksPhotoelectric receiver in plastic (IP69K) M18 housing with 15 m. fixed cable, 70 m range and a PNP-NC output.
-
SMR 9270 TP 0.1-J5
In stockPhotoelectric receiver in plastic (IP69K) M18 housing with 10 cm pigtail connector, 70 m range and a PNP-NC output.
-
SMR 9270 TS 15
In stockPhotoelectric receiver in stainless steel (IP69K) M18 housing with 15 m. fixed cable, 70 m range and a PNP-NC output.
-
SMR 9270 TS 0.1-J5
In stockPhotoelectric receiver in stainless steel (IP69K) M18 housing with 10 cm pigtail connector, 70 m range and a PNP-NC output.
-
SMT 9070C TP 0.1-J5
In stockPhotoelectric transmitter in plastic (IP69K) M18 housing with 10 cm pigtail connector
-
SMT 9070C TS 15
In stockPhotoelectric transmitter in stainless steel (IP69K) M18 housing and 15 m fixed cable
-
SMT 9070C TP 15
In stockPhotoelectric transmitter in plastic (IP69K) M18 housing with 15 m fixed cable
-
SMT 9070C TS 0.1-J5
In stockPhotoelectric transmitter in stainless steel (IP69K) M18 housing with 10 cm pigtail connector
-
SPPR 2910/1 5
In stockThe Telco Sensors SPPR 2910/1 5 packing set consists of a Retro Reflective photocell with polarizing filter, a TR SP35-50L mounting bracket and an ILR 50-50 RHE reflector. Using this photocell, it is easy to set up a reliable detection application for...
-
SG15 series
approximately 6 to 8 weeksThe SG15 light grids from Telco Sensors are specially designed as a standalone safety product in automated doors and gates, while also being TÜV certifiied as an E-Device in accordance with the EN 12453 guideline. This makes the light grids replace conventional safety edges.
-
Kabuto
In stockThe Hotron Kabuto is a unique hybrid detection system based on active infrared technology and radar doppler technology for the presence, movement and direction detection of people and objects at industrial doors or loading bays.
€277,20 excl. VAT Add to cart -
HR400-IND
approximately 2 to 4 weeksThe Hotron HR400-IND is a unique safety sensor for presence and motion detection of fast moving vehicles at industrial doors. The HR400-IND can be mounted high center above the door up to 4.7 meters in height and through its reliable detection the...
€259,56 excl. VAT Add to cart -
HR-ROBUS
In stockThe Hotron HR-ROBUS is a robust and fully waterproof door sensor for motion detection of fast moving vehicles and persons at large industrial (roller) doors up to a height of 7 meters. The HR-ROBUS is equipped with a dual relay output (NO/NC) to distinguish...
€189,00 excl. VAT Add to cart -
ULD 923 double induction loop
approximately 2 to 4 weeksHotron's ULD 923 is an underground laid induction loop with a dual coil for the detection of industrial vehicles. In particular, this sensor is suitable for the detection of high trailers of trucks and has 4 adjustable frequency ranges (20-140...
€151,52 excl. VAT Add to cart -
ULD 913 singular induction loop
approximately 2 to 4 weeksHotron's ULD 913 is an underground laid induction loop with a single coil for the detection of industrial vehicles. In particular, this sensor is suitable for the detection of high trailers of trucks and has 4 adjustable frequency ranges (20-140...
€129,47 excl. VAT Add to cart -
SMR 9270 TP 5
approximately 6 to 8 weeksPhotoelectric receiver in plastic (IP69K) M18 housing with 5 m. fixed cable, 70 m range and a PNP-NC output.
The reliable entrance and safety of industrial doors and overhead doors can be guaranteerd with the wide range of sensors which Sensor Partnes offers. Below the possibilities are listed:
A safe entrance with Telco Sensors
Telco Sensors has a wide range of photoelectric sensors, light grids and radar sensors. These optical sensors are used for the entrance and security at industrial doors or overhead doors. Telco Sensors sensors are easy to install, have a strong power and have a high immunity against external light.
The SM9000 series photoelectric sensors
The Telco Sensors SM9000 series are transmitter/receiver photoelectric sensors that distinguish themselves because of their extreme power. This makes the photoelectric sensor suited for applications in which they are exposed to a lot of dirt, water and light or where large distances are bridged, but also for applications with a lot of dust, fog, smoke or mist. An example are the industrial doors in outdoor applications. The photoelectric sensors have a M18 housing and IP69K sealing degree. Cleaning the sensors under high pressure is no problem. Available in ATEX housing for Zone 2 and 22.