These products have an IP67 sealing class. That means a completely closed housing and completely protected against dust. The products are suitable for wet environments. Water cannot penetrate when the product is immersed for a duration of up to 30 minutes at 1 meter depth.
-
ID2LD 0814E
In stockID2LD 0814E is an inductive proximity switch in a cylindrical M8 x 41 mm brass housing with 3-pin M8-connector. The sensor has a PNP-NO output, is flush mountable and has a detection range of 2 mm.
€48,76 excl. VAT Add to cart -
ID2LD 0815E
approximately 2 to 4 weeksID2LD 0815E is an inductive proximity switch in a cylindrical M8 x 41 mm brass housing with 3-pin M8-connector. The sensor has a PNP-NC output, is flush mountable and has a detection range of 2 mm.
€42,67 excl. VAT Add to cart -
IO4LD 0814E
approximately 2 to 4 weeksIO4LD 0814E is an inductive proximity switch in a cylindrical M8 x 41 mm brass housing with 3-pin M8-connector. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 455mm.
€42,67 excl. VAT Add to cart -
IO4LD 0815E
approximately 2 to 4 weeksIO4LD 0815E is an inductive proximity switch in a cylindrical M8 x 41 mm brass housing with 3-pin M8-connector. The sensor has a PNP-NC output, is non-flush mountable and has a detection range of 4 mm.
€42,67 excl. VAT Add to cart -
IBLD 0514
approximately 2 to 4 weeksThe IBLD 0514 is an inductive proximity switch with 0.8 mm detection range in M5 screw thread housing. The sensor is flush mountable has a PNP-NO switching output. The sensor is equipped with a 3-pin M8-connector.
€62,54 excl. VAT Add to cart -
IBLD 0512
approximately 2 to 4 weeksIBLD 0512 is an inductive proximity switch in a cylindrical M5 x 1.5 mm stainless steel housing with 2 m fixed cable. The sensor has an NPN-NO output and has a detection range of 0.8 mm.
€50,04 excl. VAT Add to cart -
IBLD 0513
approximately 2 to 4 weeksIBLD 0513 is an inductive proximity switch in a cylindrical M5 x 1.5 mm stainless steel housing with 2 m fixed cable. The sensor has an NPN-NC output and has a detection range of 0.8 mm.
€50,04 excl. VAT Add to cart -
OFS 010 P2S T3
approximately 6 to 8 weeksFork sensor with a fork opening of 10x17 mm
-
OFS 020 P2S T3
approximately 6 to 8 weeksFork sensor with a fork opening of 20x25 mm
-
OFS 030 P3S T3
approximately 6 to 8 weeksFork sensor with a fork opening of 30x35 mm
-
OFS 050 P3S T3
approximately 6 to 8 weeksFork sensor with a fork opening of 50x55 mm
-
OFS 080 P3S T3
approximately 6 to 8 weeksFork sensor with a fork opening of 80x55 mm
-
OFS 120 P3S T3
In stockFork sensor with a fork opening of 120x60 mm
-
OFS 220 P3S T3
approximately 6 to 8 weeksFork sensor with a fork opening of 2x40 mm
-
SMR 3206 AP T3
approximately 6 to 8 weeksSMR 3206 AP T3 is a photoelectric receiver in Ø10 housing with 3-pinned M8-connector. Ranging 6 meters, with PNP-NC output
-
SMR 3206 SG T3
In stockSMR 3206 SG T3 is a photoelectric receiver in miniature housing with 3-pin M8-connector. Range 6 meters, with PNP-NC output.