These products have an IP67 sealing class. That means a completely closed housing and completely protected against dust. The products are suitable for wet environments. Water cannot penetrate when the product is immersed for a duration of up to 30 minutes at 1 meter depth.
SMT 3000HC S30 0,15 T3 is a photoelectric transmitter in snap-in design housing with 15 cm pigtail connector. This version is widely used for doors and gates because of the discreet installation method. The range of the sensor is 15 meters.
SMR 3215 S30 0.15 T3 is a photoelectric receiver in snap-in design housing with 15 cm pigtail connector and PNP-NC output. This edition is used frequently in doors and gates because of the discreet mounting. the range of the sensor is 15 meters.
SMR 3206 S30 0.15 T3 is a photoelectric receiver in snaphousing with 15 cm pigtail connector and PNP-NC output. This version is widely used for doors and gates because of the discrete installation method. The range of the sensor is 6 meters.
SMT 3000C S30 0,15 T3 is a photoelectric transmitter in snap-in design housing with 15 cm pigtail connector. This version is widely used for doors and gates because of the discreet installation method. The range of the sensor is 6 meters.
The AD6/AP-1A is an inductive sensor in a compact stainless steel M5 cylinder housing with a measuring range of up to 0.8 mm. The sensor can be built in concisely, has a PNP (NO) switching output and is equipped with a 2 m fixed cable.
The AD1/AP-1F is an inductive sensor in a stainless steel M5 cylinder housing with a measurement range of up to 0.8 mm. The sensor is concise to install, has a PNP (NO) switching output and is equipped with a 3-pin M8 connector.
The AD1/AP-3A is an inductive sensor in a stainless steel M5 cylinder housing with a measuring range of up to 1.5 mm. The sensor can be built in concisely, has a PNP (NO) switching output and is equipped with a 2 m fixed cable.
The AD6/AP-3A is an inductive sensor in a compact stainless steel M5 cylinder housing with a measuring range of up to 1.5 mm. The sensor is concise to install, has a PNP (NO) switching output and is equipped with a 2 m fixed cable.
The AD1/AP-3F is an inductive sensor in a stainless steel M5 cylinder housing with a measurement range of up to 1.5 mm. The sensor is concise to install, has a PNP (NO) switching output and is equipped with a 3-pin M8 connector.
The AD1/CN-1A is an inductive sensor in a stainless steel M5 cylinder housing with a measuring range of up to 0.8 mm. The sensor is concise to install, has an NPN (NC) switching output and is equipped with a 2 m. fixed cable.