These products have an IP67 sealing class. That means a completely closed housing and completely protected against dust. The products are suitable for wet environments. Water cannot penetrate when the product is immersed for a duration of up to 30 minutes at 1 meter depth.
The PFM1/BN-2H is an inductive proximity from Micro Detectors switch in a metal M12 housing and equipped with a NPN-NO+NC switching output. The sensor is non-flush mountable and has a range up to 4 mm.
The PFM1/BN-4H is an inductive proximity from Micro Detectors switch in a metal M12 housing and equipped with a NPN-NO+NC switching output. The sensor is non-flush mountable and has a range up to 8 mm.
CQ55/BN-3E is a capacitive proximity switch in polyester rectangular housing with 4-pin M12 connector and has a IP67 protection degree. The sensor is non-flush mountable with a range of 25 mm and has a NPN (NO+NC) switching output.
The AM1/CN-2H is an inductive proximity switch in brass M12 housing with a 4-pin M12 connector and a NPN (NC) switching output. The sensor is non-flush mounted and has a range of 4 mm.
The AM1/CN-4H is an inductive proximity switch in brass M12 housing with a 4-pin M12 connector and a NPN (NC) switching output. The sensor is non-flush mounted and has a range of 8 mm.
The AM6/CN-2H is an inductive proximity switch in brass M12 housing with a 4-pin M12 connector and a NPN (NC) switching output. The sensor is non-flush mounted and has a range of 4 mm.
The AM6/CN-4H is an inductive proximity switch in brass M12 housing with a 4-pin M12 connector and a NPN (NC) switching output. The sensor is non-flush mounted and has a range of 8 mm.
The AH1/CN-2H is an inductive sensor in a stainless steel Ø 6.5 mm housing with a measuring range of up to 2.5 mm. The sensor is non-bondable, has a PNP (NO) switching output and is equipped with a 4-pin M12 connector.
The AH1/CN-4H is an inductive sensor in a stainless steel Ø 6.5 mm housing with a measuring range of up to 4 mm . The sensor is non-bondable, has a PNP (NO) switching output and is equipped with a 4-pin M12 connector.
The AH1/CP-2H is an inductive sensor in a stainless steel Ø 6.5 mm housing with a measuring range of up to 2.5 mm. The sensor is non-bondable, has a PNP (NC) switching output and is equipped with a 4-pin M12 connector.
The AH1/CP-4H is an inductive sensor in a stainless steel Ø 6.5 mm housing with a measuring range of up to 4 mm . The sensor is non-bondable, has a PNP (NC) switching output and is equipped with a 4-pin M12 connector.
The AM1/CP-4HAN is an ATEX certified inductive proximity switch in brass M12 housing with a 4-pin M12 connector and a PNP (NC) switch output. The sensor is non-bondable and has a range of 8 mm. The sensor is suitable for...
The AM6/CP-4HAN is an ATEX certified inductive proximity switch in brass M12 housing with a 4-pin M12 connector and a PNP (NC) switch output. The sensor is non-bondable and has a range of 8 mm. The sensor is suitable for...
The AE1/CN-2H is an inductive sensor in a stainless steel M8 housing with a measuring range of 2.5 mm. The sensor is non-flush mountable, has a NPN (NC) switching output and is equipped with a 4-pin M12-connector.
The AE1/CN-4H is an inductive sensor in a stainless steel M8 housing with a measuring range of 4 mm. The sensor is non-flush mountable, has a NPN (NC) switching output and is equipped with a 4-pin M12-connector.
The AE1/CP-2H is an inductive sensor in a stainless steel M8 housing with a measuring range of 2.5 mm. The sensor is non-flush mountable, has a PNP (NC) switching output and is equipped with a 4-pin M12-connector.