approximately 2 to 4 weeks
The pico+25/F ultrasonic sensors from microsonic with 1x PNP/NPN switching output is a compact series M18 housing with a length of just 41 mm. In addition to the variant with a axial sensor head there is also one with a 90° right-angled sensor head. The pico+25/F detects from 30 mm up to 350 mm. With three different measurement and detection ranges the sensors from the pico+ series are usable in a wide variety of applications. Sensors with a PushPull output support the SIO- and IO-Link modes. The sensors with an analog output are optionally available with a current output of 4-20 mA and voltage-based outputs of 0-10 Vdc. In the SIO-mode, the sensors are configured through pin 5 with the microsonic teach-in procedure. LinkControl allows the user to make use of the extensive configuration possibilities of the pico+ sensors. Through the LCA-2 LinkControl adapter, that is available as an accessory, the pico+ sensors can be connected to the PC.
ATTENTION: The pico+25/F is replaced by the pico+25/F/A. The new sensor version is equipped with IO-Link 1.1 that supports Smart Sensor Profiel. Do you rather configure the sensors with LinkControl? Please keep in mind that this new sensor needs a new set of parameters. Feel free to contact us if you need support.
