Available Filters
Filters

332 products found

Series
Output
Switching frequency
Housing
Sealing class
Response time
Amount of outputs
Shopping Cart

Subtotal: 64.852,06

View cartGo to checkout

These products have an IP67 sealing class. That means a completely closed housing and completely protected against dust. The products are suitable for wet environments. Water cannot penetrate when the product is immersed for a duration of up to 30 minutes at 1 meter depth.

Filter
  • mic-130/D/M

    In stock

    The mic-130/D/M is an ultrasonic sensor in all-metal M30 housing and a range from 200 up to 2,000 mm and 1 x PNP switching output. Also available in ATEX version: mic-130/D/M/EXII3D

    178,10 excl. VAT Add to cart
  • microsonic ultrasonic sensor pico+15/xx

    pico+15/F

    approximately 2 to 4 weeks

    pico+15/F is an M18 ultrasonic sensor with 1 x PNP/NPN switching output, IO-Link interface and a range of 20 to 250 mm. The pico+15/F is also available in an ATEX version. NOTE: The pico+15/F has been replaced by the pico+15 De...

  • ID2MD shoebuch inductive sensor

    ID2MD 6515C

    approximately 2 to 4 weeks
  • IO4CA shoebuch inductive sensor

    IO4CA 0814E

    In stock

    The IO4CA 0814E is an inductive proximity switch in cylindrical M8 x 43 mm brass housing and 2 meter fixed cable. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 4 mm.

    42,67 excl. VAT Read more
  • IO4CA shoebuch inductive sensor

    IO4CA 0815E

    approximately 2 to 4 weeks

    The IO4CA 0815E is an inductive proximity switch in cylindrical M8 x 43 mm brass housing and 2 meter fixed cable. The sensor has a PNP-C output, is non-flush mountable and has a detection range of 4 mm.

    42,67 excl. VAT Read more
  • IO4LD shoebuch indcutive sensor

    IO4LD 0814E

    approximately 2 to 4 weeks

    IO4LD 0814E is an inductive proximity switch in a cylindrical M8 x 41 mm brass housing with 3-pin M8-connector. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 455mm.

    42,67 excl. VAT Read more
  • IO8LI 1214E

    In stock

    IO8LI 1214E is an inductive proximity switch in a cylindrical M12 x 46 mm brass housing with 4-pin M12-connector. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 8 mm.

    38,96 excl. VAT Read more
  • IO8LI 1215E

    approximately 2 to 4 weeks

    IO8LI 1215E is an inductive proximity switch in a cylindrical M12 x 46 mm brass housing with 4-pin M12-connector. The sensor has a PNP-NC output, is non-flush mountable and has a detection range of 8 mm.

    38,96 excl. VAT Read more
  • IP12CT 1814E

    approximately 2 to 4 weeks

    The IP12CT 1814E is an inductive proximity switch in cylindrical M18 x 53 mm brass housing and 2 meter fixed cable. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 12 mm.

    44,89 excl. VAT Read more
  • IP12CT 1815E

    In stock

    The IP12CT 1815E is an inductive proximity switch in cylindrical M18 x 53 mm brass housing and 2 meter fixed cable. The sensor has a PNP-NC output, is non-flush mountable and has a detection range of 12 mm.

    44,89 excl. VAT Read more
  • IO20CT 3014E

    In stock

    The IO20CT 3014E is an inductive proximity switch in cylindrical M30 x 56 mm brass housing and 2 meter fixed cable. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 20 mm.

    57,51 excl. VAT Read more
  • IO4LD shoebuch indcutive sensor

    IO4LD 0815E

    approximately 2 to 4 weeks

    IO4LD 0815E is an inductive proximity switch in a cylindrical M8 x 41 mm brass housing with 3-pin M8-connector. The sensor has a PNP-NC output, is non-flush mountable and has a detection range of 4 mm.

    42,67 excl. VAT Read more
  • IP8CT 1214E

    In stock

    The IP8CT 1214E is an inductive proximity switch in cylindrical M12 x 50 mm brass housing and 2 meter fixed cable. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 8 mm.

    47,60 excl. VAT Read more
  • IP8CT 1215E

    In stock

    The IP8CT 1215E is an inductive proximity switch in cylindrical M12 x 50 mm brass housing and 2 meter fixed cable. The sensor has a PNP-NC output, is non-flush mountable and has a detection range of 8 mm.

    38,96 excl. VAT Read more
  • IO20CT 3015E

    approximately 2 to 4 weeks

    The IO20CT 3015E is an inductive proximity switch in cylindrical M30 x 56 mm brass housing and 2 meter fixed cable. The sensor has a PNP-NC output, is non-flush mountable and has a detection range of 20 mm.

    57,51 excl. VAT Read more
  • IO20LI 3014E

    In stock

    IO20LI 3014E is an inductive proximity switch in a cylindrical M30 x 52 mm brass housing with 4-pin M12-connector. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 20 mm.

    67,13 excl. VAT Read more