These products have an IP67 sealing class. That means a completely closed housing and completely protected against dust. The products are suitable for wet environments. Water cannot penetrate when the product is immersed for a duration of up to 30 minutes at 1 meter depth.
C18P/BP-2A is a capacitive proximity switch in polyester M18 housing with 2 meter fixed cable, The sensor is non-flush mountable with a range of 12 mm.
The AM6/AP-4H is an inductive proximity switch in brass M12 housing with a 4-pin M12 connector and a PNP (NO) switching output. The sensor is non-flush mounted and has a range of 8 mm.
The AM6/AP-4A is an inductive proximity switch in a brass M12 housing with a 2m. fixed cable connection and a PNP (NO) switching output. The sensor is non-flush mounted and has a range of 8 mm.
The AM6/AP-2H is an inductive proximity switch in brass M12 housing with a 4-pin M12 connector and a PNP (NO) switching output. The sensor is non-flush mounted and has a range of 4 mm.
The AM6/AP-2A is an inductive proximity switch in a brass M12 housing with a 2m. fixed cable connection and a PNP (NO) switching output. The sensor is non-flush mounted and has a range of 4 mm.
AK1/AP-2HAN is an ATEX certified inductive proximity switch in a brass M18 housing with 4-pin M12 connector and has a PNP NO switch output. The sensor is non-bonding with a range of 8 mm. This sensor is suitable for II 3G...
The AE6/AP-4A is an inductive sensor in a stainless steel M8 housing (short body version) with a measuring range of 4 mm. The sensor is non-flush mountable, has a PNP (NO) switching output and is equipped with a 2 m. fixed cable.
The AE6/AP-4F is an inductive sensor in a stainless steel M8 housing (short body version) with a measuring range of 4 mm. The sensor is non-flush mountable, has a PNP (NO) switching output and is equipped with a 3-pin M8 connector.
IOLI 3014 is an inductive proximity switch in a cylindrical M30 x 52 mm brass housing with 4-pin M12-connector. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 15 mm.
PM3/00-2H is an inductive proximity switch in a brass M12 housing with a 4 pin M12 connector and is equipped with a DECOUT (PushPull) switching output. The sensor is non-flush mountable and has a range of 4 mm.
PM3/00-2H is an inductive proximity switch in a brass M12 housing with a 4 pin M12 connector and is equipped with a DECOUT (PushPull) switching output. The sensor is flush mountable and has a range of 8 mm.
The AM1/A0-2A is an inductive proximity switch in brass M12 housing with a 2 m. fixed cable connection and an PNP/NPN (NO) switching output. The sensor can be non-flush mounted and has a range of 4 mm.
CQ55/BN-3A is a capacitive proximity switch in polyester rectangular housing with 2 m. fixed cable. The sensor is non-flush mountable with a range of 25 mm and has a NPN (NO+NC) switching output.
CQ55/BN-3E is a capacitive proximity switch in polyester rectangular housing with 4-pin M12 connector and has a IP67 protection degree. The sensor is non-flush mountable with a range of 25 mm and has a NPN (NO+NC) switching output.
The VK2/A0-2B is a cylindrical inductive proximity switch in a brass M18 housing with a measuring range of 8 mm. The sensor is non-bondable with a 2 m fixed cable connection and an AC NO switching output. The sensor has...
The VK2/A0-1H is a cylindrical inductive proximity switch in a brass M18 housing with a measuring range of 5 mm. The sensor is bonded with a 4-pin M12 connector and an AC NO switching output. The sensor has an IP67...