These products have an IP67 sealing class. That means a completely closed housing and completely protected against dust. The products are suitable for wet environments. Water cannot penetrate when the product is immersed for a duration of up to 30 minutes at 1 meter depth.
The SMP 8500 MG J is a photocell probe with a range of up to 50 cm. in stainless steel M18 housing. The photocell has a 4-pin M12 connector and is PNP-NO+NC adjustable. Due to the round optics and high excess gain, very insensitive to...
The SMP 8500 PG J is a photocell probe with a range of up to 50 cm. in plastic M18 housing. The photocell has a 4-pin M12 connector and is PNP-NO+NC adjustable. Due to the round optics and high excess gain, very insensitive to...
The SMP 8500 MG 5 is a photocell probe with a range of up to 50 cm in stainless steel M18 housing. The photocell has a 5 m. fixed cable and is PNP-NO+NC adjustable. Due to the round optics and high excess gain, very insensitive to...
The SMP 8500 PG 5 is a photocell probe with a range of up to 50 cm. in plastic M18 housing. The photocell has a 5 m. fixed cable and is PNP-NO+NC adjustable. Due to the round optics and high excess gain, very insensitive to...
The IO4CA 0814E is an inductive proximity switch in cylindrical M8 x 43 mm brass housing and 2 meter fixed cable. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 4 mm.
The IO4CA 0815E is an inductive proximity switch in cylindrical M8 x 43 mm brass housing and 2 meter fixed cable. The sensor has a PNP-C output, is non-flush mountable and has a detection range of 4 mm.
IO4LD 0814E is an inductive proximity switch in a cylindrical M8 x 41 mm brass housing with 3-pin M8-connector. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 455mm.
IO4LD 0815E is an inductive proximity switch in a cylindrical M8 x 41 mm brass housing with 3-pin M8-connector. The sensor has a PNP-NC output, is non-flush mountable and has a detection range of 4 mm.
The IP8CT 1214E is an inductive proximity switch in cylindrical M12 x 50 mm brass housing and 2 meter fixed cable. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 8 mm.
The IP8CT 1215E is an inductive proximity switch in cylindrical M12 x 50 mm brass housing and 2 meter fixed cable. The sensor has a PNP-NC output, is non-flush mountable and has a detection range of 8 mm.
IO8LI 1214E is an inductive proximity switch in a cylindrical M12 x 46 mm brass housing with 4-pin M12-connector. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 8 mm.
IO8LI 1215E is an inductive proximity switch in a cylindrical M12 x 46 mm brass housing with 4-pin M12-connector. The sensor has a PNP-NC output, is non-flush mountable and has a detection range of 8 mm.
The IP12CT 1814E is an inductive proximity switch in cylindrical M18 x 53 mm brass housing and 2 meter fixed cable. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 12 mm.
The IP12CT 1815E is an inductive proximity switch in cylindrical M18 x 53 mm brass housing and 2 meter fixed cable. The sensor has a PNP-NC output, is non-flush mountable and has a detection range of 12 mm.
The IO20CT 3014E is an inductive proximity switch in cylindrical M30 x 56 mm brass housing and 2 meter fixed cable. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 20 mm.