These products have an IP67 sealing class. That means a completely closed housing and completely protected against dust. The products are suitable for wet environments. Water cannot penetrate when the product is immersed for a duration of up to 30 minutes at 1 meter depth.
Special light grid for gates, fencing and other statically arranged horizontally closing access systems. Suitable for outdoor applications. Available in profile heights from 85 cm to 280 cm and ranges up to 10 meters or 14 meters.
When you choose to automate the opening and closing of your sliding gate, Telco Sensors SG10 M/S is the right choice to prevent entrapment, injury and damage to people, vehicles or objects. Suitable for outdoor applications where both the walk-in side...
The PFM1/BN-2H is an inductive proximity from Micro Detectors switch in a metal M12 housing and equipped with a NPN-NO+NC switching output. The sensor is non-flush mountable and has a range up to 4 mm.
The PFM1/BN-4H is an inductive proximity from Micro Detectors switch in a metal M12 housing and equipped with a NPN-NO+NC switching output. The sensor is non-flush mountable and has a range up to 8 mm.
Telco Sensors' SG1 series are light curtains consisting of a transmitter and receiver in one housing. This light curtain is available in 12-36Vdc with a 5-wire cable and a relay. The light curtain also features a time-out...
Telco Sensors' SS01 series is a series of light curtains for sensing applications within industrial automation. Suitable for use in dirty or wet environments. Various profile heights between 16 cm and 198 cm. Choice of a range of 4 or 10...
C30P/00-2A is a capacitive proximity switch in polyester M30 housing with 2 meter fixed cable. The sensor is non-flush mountable with a range of 25 mm.
CQ55/BN-3A is a capacitive proximity switch in polyester rectangular housing with 2 m. fixed cable. The sensor is non-flush mountable with a range of 25 mm and has a NPN (NO+NC) switching output.
CQ55/BN-3E is a capacitive proximity switch in polyester rectangular housing with 4-pin M12 connector and has a IP67 protection degree. The sensor is non-flush mountable with a range of 25 mm and has a NPN (NO+NC) switching output.
The AM1/CN-2A is an inductive proximity switch in brass M12 housing with a 2 m. fixed cable connection and a NPN (NC) switching output. The sensor cannot be flush-mounted and has a range of 4 mm.
The AM1/CN-4A is an inductive proximity switch in brass M12 housing with a 2 m. fixed cable connection and a NPN (NC) switching output. The sensor cannot be flush-mounted and has a range of 8 mm.
The AM6/CN-2A is an inductive proximity switch in brass M12 housing with a 2 m. right-angled fixed cable connection and a NPN (NC) switching output. The sensor cannot be flush-mounted and has a range of 4 mm.
The AM6/CN-4A is an inductive proximity switch in brass M12 housing with a 2 m. fixed cable connection and a NPN (NC) switching output. The sensor cannot be flush-mounted and has a range of 8 mm.
The IL1/CN-4A is an inductive proximity switch in a compact cubic housing with a 2 m fixed cable connection. The sensor is non-flush mountable, with a measuring range of 6 mm and a NPN (NC) switching output.
The IL1/CN-4F is an inductive proximity switch in a compact cubic housing with a 3-pin M8 connector. The sensor is non-flush mounted, with a measuring range of 6 mm and a NPN (NC) switching output.
The AM1/CN-2H is an inductive proximity switch in brass M12 housing with a 4-pin M12 connector and a NPN (NC) switching output. The sensor is non-flush mounted and has a range of 4 mm.