These products have an IP67 sealing class. That means a completely closed housing and completely protected against dust. The products are suitable for wet environments. Water cannot penetrate when the product is immersed for a duration of up to 30 minutes at 1 meter depth.
The AM1/AP-2H is an inductive proximity switch in brass M12 housing with a 4-pin M12 connector and a PNP (NO) switching output. The sensor is non-flush mounted and has a range of 4 mm.
The AM1/AP-4H is an inductive proximity switch in brass M12 housing with a 4-pin M12 connector and a PNP (NO) switching output. The sensor is non-flush mounted and has a range of 8 mm.
The AM1/AP-2C is an inductive proximity switch in a brass M12 housing with a right-angled 2m. fixed cable connection and a PNP (NO) switching output. The sensor is non-flush mounted and has a range of 4 mm.
The AM6/AP-2C is an inductive proximity switch in a brass M12 housing with a right-angled 2m. fixed cable connection and a PNP (NO) switching output. The sensor is non-flush mounted and has a range of 4 mm.
The AH1/AP-2A is an inductive sensor in a stainless steel Ø 6.5 mm housing with a measuring range of up to 2.5 mm. The sensor is non-binding, has an NPN (NC) switching output and is equipped with a 2 m. fixed...
The AH1/AP-2H is an inductive sensor in a stainless steel Ø 6.5 mm housing with a measuring range of up to 2.5 mm. The sensor is non-bondable, has an NPN (NC) switching output and is equipped with a 4-pin M12 connector.
The AH1/AP-4A is an inductive sensor in a stainless steel Ø 6.5 mm housing with a measuring range up to 4 mm . The sensor is non-binding, has an NPN (NC) switching output and is equipped with a 2 m....
The AH1/AP-4F is an inductive sensor in a stainless steel Ø 6.5 mm housing with a measuring range of up to 4 mm . The sensor is non-bondable, has an NPN (NC) switching output and is equipped with a 3-pin M8 connector.
The AH1/AP-4H is an inductive sensor in a stainless steel Ø 6.5 mm housing with a measuring range of up to 4 mm . The sensor is non-bondable, has an NPN (NC) switching output and is equipped with a 4-pin M12 connector.
The AH1/AP-2F is an inductive sensor in a stainless steel Ø 6.5 mm housing with a measuring range of up to 2.5 mm. The sensor is non-bondable, has an NPN (NC) switching output and is equipped with a 3-pin M8 connector.
De AH6/AP-2A is een inductieve sensor in een RVS Ø 6,5 mm behuizing met een meetbereik tot 2,5 mm. De sensor is niet bondig in te bouwen, heeft een NPN (NC) schakeluitgang en is uitgerust met een 2 m. vaste…
The AH6/AP-2F is an inductive sensor in a stainless steel Ø 6.5 mm housing with a measuring range of up to 2.5 mm. The sensor is non-bondable, has an NPN (NC) switching output and is equipped with a 3-pin M8 connector.
De AH6/AP-4A is een inductieve sensor in een RVS Ø 6,5 mm behuizing met een meetbereik tot 4 mm . De sensor is niet bondig in te bouwen, heeft een NPN (NC) schakeluitgang en is uitgerust met een 2 m.…
The AH6/AP-4F is an inductive sensor in a stainless steel Ø 6.5 mm housing with a measuring range of up to 4 mm . The sensor is non-bondable, has an NPN (NC) switching output and is equipped with a 3-pin M8 connector.
AK1/AP-2AAN is an ATEX certified inductive proximity switch in a brass M18 housing with 2m fixed cable and has a PNP NO switch output. The sensor is non-bonding with a range of 8mm. This sensor is suitable for II 3G...
AK1/AP-2H is an inductive proximity switch in brass M18 housing. With a 4-pin M12 connector and equipped with a PNP NO switching output. The sensor can be non-flush mounted with a range of 8 mm.