These products have an IP67 sealing class. That means a completely closed housing and completely protected against dust. The products are suitable for wet environments. Water cannot penetrate when the product is immersed for a duration of up to 30 minutes at 1 meter depth.
The IO4CA 0814E is an inductive proximity switch in cylindrical M8 x 43 mm brass housing and 2 meter fixed cable. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 4 mm.
IO4LD 0814E is an inductive proximity switch in a cylindrical M8 x 41 mm brass housing with 3-pin M8-connector. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 455mm.
The AE6/AP-4A is an inductive sensor in a stainless steel M8 housing (short body version) with a measuring range of 4 mm. The sensor is non-flush mountable, has a PNP (NO) switching output and is equipped with a 2 m. fixed cable.
The AE6/AP-4F is an inductive sensor in a stainless steel M8 housing (short body version) with a measuring range of 4 mm. The sensor is non-flush mountable, has a PNP (NO) switching output and is equipped with a 3-pin M8 connector.
The AE1/AP-2A is an inductive sensor in a stainless steel M8 housing with a measuring range of 2.5 mm. The sensor is non-flush mountable, has a PNP (NO) switching output and is equipped with a 2 m. fixed cable.
The AE1/AP-2F is an inductive sensor in a stainless steel M8 housing with a measuring range of 2.5 mm. The sensor is non-bondable, has a PNP (NO) switching output and is equipped with a 3-pin M8 connector.
The AE1/AP-2H is an inductive sensor in a stainless steel M8 housing with a measuring range of 2.5 mm. The sensor is non-flush mountable, has a PNP (NO) switching output and is equipped with a 4-pin M12-connector.
The AE1/AP-4A is an inductive sensor in a stainless steel M8 housing with a measuring range of 4 mm. The sensor is non-flush mountable, has a PNP (NO) switching output and is equipped with a 2 m. fixed cable.
The AE1/AP-4F is an inductive sensor in a stainless steel M8 housing with a measuring range of 4 mm. The sensor is non-flush mountable, has a PNP (NO) switching output and is equipped with a 3-pin M8 connector.
The AE1/AP-4H is an inductive sensor in a stainless steel M8 housing with a measuring range of 4 mm. The sensor is non-flush mountable, has a PNP (NO) switching output and is equipped with a 4-pin M12-connector.
The AE6/AP-2A is an inductive sensor in a stainless steel M8 housing (short body version) with a measuring range of 2.5 mm. The sensor is non-flush mountable, has a PNP (NO) switching output and is equipped with a 2 m. fixed cable.
The AE6/AP-2F is an inductive sensor in a stainless steel M8 housing (short body version) with a measuring range of 2.5 mm. The sensor is non-flush mountable, has a PNP (NO) switching output and is equipped with a 3-pin M8 connector.