These products have an IP67 sealing class. That means a completely closed housing and completely protected against dust. The products are suitable for wet environments. Water cannot penetrate when the product is immersed for a duration of up to 30 minutes at 1 meter depth.
IO4CA 0814E
In stockThe IO4CA 0814E is an inductive proximity switch in cylindrical M8 x 43 mm brass housing and 2 meter fixed cable. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 4 mm.
€42,67 excl. VAT Add to cartIO4LD 0814E
approximately 2 to 4 weeksIO4LD 0814E is an inductive proximity switch in a cylindrical M8 x 41 mm brass housing with 3-pin M8-connector. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 455mm.
€42,67 excl. VAT Add to cartIP8CT 1214E
In stockThe IP8CT 1214E is an inductive proximity switch in cylindrical M12 x 50 mm brass housing and 2 meter fixed cable. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 8 mm.
€47,60 excl. VAT Add to cartIO8LI 1214E
In stockIO8LI 1214E is an inductive proximity switch in a cylindrical M12 x 46 mm brass housing with 4-pin M12-connector. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 8 mm.
€38,96 excl. VAT Add to cartIP12CT 1814E
approximately 2 to 4 weeksThe IP12CT 1814E is an inductive proximity switch in cylindrical M18 x 53 mm brass housing and 2 meter fixed cable. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 12 mm.
€44,89 excl. VAT Add to cartIO20CT 3014E
In stockThe IO20CT 3014E is an inductive proximity switch in cylindrical M30 x 56 mm brass housing and 2 meter fixed cable. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 20 mm.
€57,51 excl. VAT Add to cartIO20LI 3014E
In stockIO20LI 3014E is an inductive proximity switch in a cylindrical M30 x 52 mm brass housing with 4-pin M12-connector. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 20 mm.
€67,13 excl. VAT Add to cartXT218A1PAL2
approximately 6 to 8 weeksXT218A1PAL2 is a non-flush mountable capacitive sensor in plastic M18 housing with 2 m. fixed cable. The sensor has a maximum range of 8 mm, a PNP-NO switching output and a 12-24 Vdc supply voltage.
SPBS 2602T J
In stockSPBS 2602T J is a cubic photoelectric sensor with background suppression, 200 cm range, rotatable 4-pin M12 connector and PNP/NPN output. The sensitivity and On/Off delay is adjustable via potentiometer.
SPPR 2610T J
In stockThe SPPR 2610T J is a retro-reflective photelectric sensor with a range of 10 meters, a PNP switching output and rotatable M12-connector. Sensitivity and on/off delay are adjustable via potentiometer. Mounting bracket included, reflector sold separately.
SPR 2945T 5
In stockSPR 2945T 5 is a photoelectric receiver which is placed opposite of the SPT 2945 5 transmitter. This combination of transmitter and receiver has a range of up to 45 meters, a relay output and 12-240 Vac/dc power supply. Sensitivity and on/off delay are configurable through a potentiometer.
PFM1/AP-2H
approximately 6 to 8 weeksThe PFM1/AP-2H is an inductive proximity switch from Micro Detectors in an M12 housing, equipped with a PNP NO switching output. The sensor can be non-flush mounted and has a measuring range of 4 mm.
€60,39 excl. VAT Add to cartPFM1/AP-4H
approximately 6 to 8 weeksThe PFM1/AP-4H is an inductive proximity switch from Micro Detectors in an M12 housing, equipped with a PNP NO+NC switching output. The sensor can be non-flush mounted and has a measuring range of 8 mm.
€62,88 excl. VAT Add to cartPFM1/BP-2H
approximately 6 to 8 weeksThe PFM1/BP-2H is an inductive proximity switch from Micro Detectors in an M12 housing, equipped with a PNP NO+NC switching output. The sensor can be flush-mounted and has a measuring range of 4 mm.
€62,63 excl. VAT Add to cartPFM1/BP-2H26
approximately 6 to 8 weeksThe PFM1/BP-2H26 is an inductive proximity switch from Micro Detectors in a metal M12 and equipped with a PNP NO+NC switching output. The sensor is non-flush mountable and has a range up to 4 mm. This sensor is suitable for applications with high temperatures: -25℃ tot 110℃.
€130,55 excl. VAT Add to cartPFM1/BP-2HAN
approximately 6 to 8 weeksThe PFM1/BP-2HAN is an ATEX certified inductive proximity switch from Micro Detectors in an M12 housing, equipped with PNP NO+NC switching output. The sensor is non-bondable and has a measuring range of 4 mm. The inductive proximity switch is suitable for ATEX II...
€84,56 excl. VAT Add to cart
In stock
approximately 2 to 4 weeks
