These products have an IP67 sealing class. That means a completely closed housing and completely protected against dust. The products are suitable for wet environments. Water cannot penetrate when the product is immersed for a duration of up to 30 minutes at 1 meter depth.
AM1/A0-4A
approximately 6 to 8 weeksThe AM1/A0-4A is an inductive proximity switch in brass M12 housing with a 4-pin M12 connector and a PNP/NPN (NO) switching output. The sensor is non-flush mounted and has a range of 8 mm.
€46,74 excl. VAT Add to cartAM1/CN-2H
approximately 6 to 8 weeksThe AM1/CN-2H is an inductive proximity switch in brass M12 housing with a 4-pin M12 connector and a NPN (NC) switching output. The sensor is non-flush mounted and has a range of 4 mm.
€32,04 excl. VAT Add to cartAM1/CN-4H
approximately 6 to 8 weeksThe AM1/CN-4H is an inductive proximity switch in brass M12 housing with a 4-pin M12 connector and a NPN (NC) switching output. The sensor is non-flush mounted and has a range of 8 mm.
€38,72 excl. VAT Add to cartAM6/CN-2H
approximately 6 to 8 weeksThe AM6/CN-2H is an inductive proximity switch in brass M12 housing with a 4-pin M12 connector and a NPN (NC) switching output. The sensor is non-flush mounted and has a range of 4 mm.
€32,04 excl. VAT Add to cartAM6/CN-4H
approximately 6 to 8 weeksThe AM6/CN-4H is an inductive proximity switch in brass M12 housing with a 4-pin M12 connector and a NPN (NC) switching output. The sensor is non-flush mounted and has a range of 8 mm.
€38,72 excl. VAT Add to cartAM1/A0-4H
approximately 6 to 8 weeksThe AM1/A0-4H is an inductive proximity switch in brass M12 housing with a 4-pin M12 connector and a PNP/NPN (NO) switching output. The sensor is non-flush mounted and has a range of 8 mm.
€48,07 excl. VAT Add to cartAH1/CN-2H
approximately 6 to 8 weeksThe AH1/CN-2H is an inductive sensor in a stainless steel Ø 6.5 mm housing with a measuring range of up to 2.5 mm. The sensor is non-bondable, has a PNP (NO) switching output and is equipped with a 4-pin M12 connector.
€45,55 excl. VAT Add to cartAH1/CN-4H
approximately 6 to 8 weeksThe AH1/CN-4H is an inductive sensor in a stainless steel Ø 6.5 mm housing with a measuring range of up to 4 mm . The sensor is non-bondable, has a PNP (NO) switching output and is equipped with a 4-pin M12 connector.
AH1/CP-4H
approximately 6 to 8 weeksThe AH1/CP-4H is an inductive sensor in a stainless steel Ø 6.5 mm housing with a measuring range of up to 4 mm . The sensor is non-bondable, has a PNP (NC) switching output and is equipped with a 4-pin M12 connector.
AH1/CP-2H
approximately 6 to 8 weeksThe AH1/CP-2H is an inductive sensor in a stainless steel Ø 6.5 mm housing with a measuring range of up to 2.5 mm. The sensor is non-bondable, has a PNP (NC) switching output and is equipped with a 4-pin M12 connector.
€45,55 excl. VAT Add to cartAM1/CP-4HAN
In stockThe AM1/CP-4HAN is an ATEX certified inductive proximity switch in brass M12 housing with a 4-pin M12 connector and a PNP (NC) switch output. The sensor is non-bondable and has a range of 8 mm. The sensor is suitable for...
€52,29 excl. VAT Add to cartAM6/CP-4HAN
approximately 6 to 8 weeksThe AM6/CP-4HAN is an ATEX certified inductive proximity switch in brass M12 housing with a 4-pin M12 connector and a PNP (NC) switch output. The sensor is non-bondable and has a range of 8 mm. The sensor is suitable for...
€55,88 excl. VAT Add to cartAE1/CN-2H
approximately 6 to 8 weeksThe AE1/CN-2H is an inductive sensor in a stainless steel M8 housing with a measuring range of 2.5 mm. The sensor is non-flush mountable, has a NPN (NC) switching output and is equipped with a 4-pin M12-connector.
€37,40 excl. VAT Add to cartAE1/CN-4H
approximately 6 to 8 weeksThe AE1/CN-4H is an inductive sensor in a stainless steel M8 housing with a measuring range of 4 mm. The sensor is non-flush mountable, has a NPN (NC) switching output and is equipped with a 4-pin M12-connector.
AE1/CP-2H
approximately 6 to 8 weeksThe AE1/CP-2H is an inductive sensor in a stainless steel M8 housing with a measuring range of 2.5 mm. The sensor is non-flush mountable, has a PNP (NC) switching output and is equipped with a 4-pin M12-connector.
€37,40 excl. VAT Add to cartAE1/CP-4H
approximately 6 to 8 weeksThe AE1/CP-4H is an inductive sensor in a stainless steel M8 housing with a measuring range of 4 mm. The sensor is non-flush mountable, has a PNP (NC) switching output and is equipped with a 4-pin M12-connector.
€45,60 excl. VAT Add to cart
approximately 6 to 8 weeks
In stock