These products have an IP67 sealing class. That means a completely closed housing and completely protected against dust. The products are suitable for wet environments. Water cannot penetrate when the product is immersed for a duration of up to 30 minutes at 1 meter depth.
IO4CA 0814E
In stockThe IO4CA 0814E is an inductive proximity switch in cylindrical M8 x 43 mm brass housing and 2 meter fixed cable. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 4 mm.
€42,67 excl. VAT Add to cartIO4CA 0815E
approximately 2 to 4 weeksThe IO4CA 0815E is an inductive proximity switch in cylindrical M8 x 43 mm brass housing and 2 meter fixed cable. The sensor has a PNP-C output, is non-flush mountable and has a detection range of 4 mm.
€42,67 excl. VAT Add to cartIO4LD 0814E
approximately 2 to 4 weeksIO4LD 0814E is an inductive proximity switch in a cylindrical M8 x 41 mm brass housing with 3-pin M8-connector. The sensor has a PNP-NO output, is non-flush mountable and has a detection range of 455mm.
€42,67 excl. VAT Add to cartIO4LD 0815E
approximately 2 to 4 weeksIO4LD 0815E is an inductive proximity switch in a cylindrical M8 x 41 mm brass housing with 3-pin M8-connector. The sensor has a PNP-NC output, is non-flush mountable and has a detection range of 4 mm.
€42,67 excl. VAT Add to cartAE6/AP-4A
approximately 6 to 8 weeksThe AE6/AP-4A is an inductive sensor in a stainless steel M8 housing (short body version) with a measuring range of 4 mm. The sensor is non-flush mountable, has a PNP (NO) switching output and is equipped with a 2 m. fixed cable.
€38,72 excl. VAT Add to cartAE6/AP-4F
In stockThe AE6/AP-4F is an inductive sensor in a stainless steel M8 housing (short body version) with a measuring range of 4 mm. The sensor is non-flush mountable, has a PNP (NO) switching output and is equipped with a 3-pin M8 connector.
€41,39 excl. VAT Add to cartAE1/AN-4H
approximately 6 to 8 weeksThe AE1/AN-4H is an inductive sensor in a stainless steel M8 housing with a measuring range of 4 mm. The sensor is non-flush mountable, has a NPN (NO) switching output and is equipped with a 4-pin M12-connector.
€44,73 excl. VAT Add to cartAE1/CN-2A
approximately 6 to 8 weeksThe AE1/CN-2A is an inductive sensor in a stainless steel M8 housing with a measuring range of 2.5 mm. The sensor is non-flush mountable, has a NPN (NC) switching output and is equipped with a 2 m. fixed cable.
€32,04 excl. VAT Add to cartAE1/CN-2F
approximately 6 to 8 weeksThe AE1/CN-2F is an inductive sensor in a stainless steel M8 housing with a measuring range of 2.5 mm. The sensor is non-flush mountable, has a NPN (NC) switching output and is equipped with a 3-pin M8-connector.
€34,06 excl. VAT Add to cartAE1/CN-2H
approximately 6 to 8 weeksThe AE1/CN-2H is an inductive sensor in a stainless steel M8 housing with a measuring range of 2.5 mm. The sensor is non-flush mountable, has a NPN (NC) switching output and is equipped with a 4-pin M12-connector.
€37,40 excl. VAT Add to cartAE1/AN-2A
approximately 6 to 8 weeksThe AE1/AN-2A is an inductive sensor in a stainless steel M8 housing with a measuring range of 2.5 mm. The sensor is non-flush mountable, has a NPN (NO) switching output and is equipped with a 2 m. fixed cable.
€32,04 excl. VAT Add to cartAE1/AN-2F
approximately 6 to 8 weeksThe AE1/AN-2F is an inductive sensor in a stainless steel M8 housing with a measuring range of 2.5 mm. The sensor is non-flush mountable, has a NPN (NO) switching output and is equipped with a 3-pin M8-connector.
€34,06 excl. VAT Add to cartAE1/AN-2H
approximately 6 to 8 weeksThe AE1/AN-2H is an inductive sensor in a stainless steel M8 housing with a measuring range of 2.5 mm. The sensor is non-flush mountable, has a NPN (NO) switching output and is equipped with a 4-pin M12-connector.
€37,40 excl. VAT Add to cartAE1/AN-4A
approximately 6 to 8 weeksThe AE1/AN-4A is an inductive sensor in a stainless steel M8 housing with a measuring range of 4 mm. The sensor is non-flush mountable, has a NPN (NO) switching output and is equipped with a 2 m. fixed cable.
€38,72 excl. VAT Add to cartAE1/AN-4F
approximately 6 to 8 weeksThe AE1/AN-4F is an inductive sensor in a stainless steel M8 housing with a measuring range of 4 mm. The sensor is non-flush mountable, has a NPN (NO) switching output and is equipped with a 3-pin M8-connector.
€41,39 excl. VAT Add to cartAE1/CN-4A
approximately 6 to 8 weeksThe AE1/CN-4A is an inductive sensor in a stainless steel M8 housing with a measuring range of 4 mm. The sensor is non-flush mountable, has a NPN (NC) switching output and is equipped with a 2 m. fixed cable.
€38,72 excl. VAT Add to cart
In stock
approximately 2 to 4 weeks
